467282
25
Zoom out
Zoom in
Previous page
1/40
Next page
Press [RECORD] again while recording can stop this action
immediately.
When the capacity is full, the recording will be stopped
automatically.
When the record ending is finished, the recording will be
stopped automatically.
Press [PLAY/STOP] button to enter the user song selected
mode. LCD displays the sequence number of user’s song
and “UserSong”.
Press [+/YES] or [-/NO] button to select the user song you
want to playback.
On the left side of LCD, cursor indicates whether the track
data has been recorded or not. If there’s data on this track,
the cursor will be lightened.
To mute a track, simply press the button of selected track
and cursor will be darkened. This track will not sound when
the song is played.
Press [PLAY/STOP] button again to play the user song. If
there is no user song you have recorded it will exit the user
song selected mode.
Press [PLAY/STOP] button to enter the user song selection
mode.
Press [+/YES] or [-/NO] button to select the user song you
want to delete.
Press [RECORD] button, LCD displays “Delete?”. Press the
[+/YES] button to delete the user song.
Stopping Recording
Playing back the User Song
Deleting the User Song
1.
2.
3.
1.
2.
3.
Note:
Hold down [RECORD] and [PLAY/STOP] button then power on,
all recorded data will be erased.
25
Song-opname
Opname beëindigen
Gebruikerssong afspelen
Gebruikerssong verwijderen
Druk gedurende de opname nogmaals op de RECORD-toets om de
oname onmiddellijk te beëindigen.
Wanneer de beschikbare opnamecapaciteit zijn einde heeft bereikt, stopt
de opname automatisch.
Wanneer de Ending-sectie wordt gebruikt, stopt de opname automatisch
een het einde van de Ending.
1. Druk op de PLAY/STOP-toets om toegang te krijgen tot de
Gebruikerssongkeuze-modus. Het LCD-venster toont het sequence-
nummer van de gebruikerssong en “UserSong”.
2. Druk op de toetsen +/YES of -/NO om de gebruikerssong die je wilt
afspelen te kiezen.
Aan de linkerkant van het LCD-venster geeft de cursor aan of er data op
het spoor zijn opgenomen of niet. Als er data op het spoor staan is de
cursor verlicht.
Om een spoor te onderdrukken, druk simpelweg op de knop van het
beftreffende spoor en de cursor is niet langer verlicht. Dit spoor wordt
niet weergegeven als de song wordt afgespeeld.
3. Druk nogmaals op de PLAY/STOP-toets om het afspelen van de
gebruikerssong te starten. Als er geen gebruikerssongs zijn die je hebt
opgenomen, wordt de Gebruikerssongkeuze-modus vanzelf verlaten.
1. Druk op de PLAY/STOP-toets om toegang te krijgen tot de
Gebruikerssongkeuze-modus.
2. Druk op de toetsen +/YES of -/NO om de gebruikerssong die je wilt
verwijderen te kiezen.
3. Druk op de RECORD-toets, het LCD-venster toont “Delete?”. Druk op
de +/YES-toets om de betreffende song te verwijderen.
Opmerking:
Houd de toetsen RECORD en PLAY/STOP ingedrukt bij het inschakelen
van het apparaat om alle data te wissen.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Medeli MD200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Medeli MD200 in the language / languages: Dutch as an attachment in your email.

The manual is 8,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info