562493
19
Zoom out
Zoom in
Previous page
1/40
Next page
MIXER
TRANSPOSE
MIDI IN/ OUT
Press and hold the [SHIFT] button and then repeatedly press the
[FUNCTION] button to select MIDI in/ out menu. The LCD displays
“xxx Midi In”/ “xxx Midi Out”.
1. Use [+/YES]/ [-/NO] button or data dial to change MIDI in channel:
1~16, ALL. Press [+/YES] and [-/NO] buttons simultaneously to
restore MIDI in channel to its default setting: ALL.
2. Use [+/YES]/ [-/NO] button or data dial to change MIDI out channel:
1~16. Press [+/YES] and [-/NO] buttons simultaneously to restore
MIDI out channel to its default setting: 1.
Auto Power Off
1. Press and hold the [SHIFT] button and then repeatedly press the
[FUNCTION] button to select auto power off menu. The LCD
displays “xxx Power Off”.
Use [+/YES]/ [-/NO] button or data dial to change auto power off
time. This function can offer three options: 30 minutes, 60 minutes
or OFF and the default setting is: 30 minutes.
19
Mixer
Mixer function can control the volume of different tracks. It just likes a
mini type mixing controller, separately control the left/right hand track
volume, bass track volume, and rhythm track volume and so on.
1. Press the [MIXER] button to enter the mixer function menu, the
LCD displays “030 Rhythm_s” for the first time when powered on;
after then it will keep your last options every time.
2. Repeatedly press the [MIXER] button to select one that you want
to set. Use [+/YES]/ [-/NO] button or data dial to change parameters.
The option and parameters are as follows:
Adjust the Rhythm track volume.
Adjust the Percussion track volume.
Adjust the Bass track volume.
Adjust the Chord 1 track volume.
Adjust the Chord 2 track volume.
Adjust the Chord 3 track volume.
Adjust the Phrase 1 track volume.
Adjust the Phrase 2 track volume.
Adjust the Upper 1 track volume.
Adjust the Upper 2 track volume.
Adjust the Lower track volume.
XXX Rhythm_s
XXX Rhythm_m
XXX Bass
XXX Chord1
XXX Chord2
XXX Chord3
XXX Phrase1
XXX Phrase2
XXX Upper 1
XXX Upper 2
XXX Lower
0-32
0-32
0-32
0-32
0-32
0-32
0-32
0-32
0-32
0-32
0-32
30
30
27
30
30
30
30
30
30
22
20
Note:
The function menu status will exit if no operation is done within 5 seconds.
Midi In
Midi Out
PowerOff
Rhythm_s
PIANO
FUNCTION
SHIFT
/ NO
/ YES
/ NO
/ YES
0
5
25
75
95
100
Aw_A100_Manual_G03_131031
2013󾜀󾜀10󾜀󾜀31󾜀󾜀 13:35:20
Functiemenu
MIDI in/uit
Druk de [Shift]-toets in, houd deze ingedrukt en druk herhaaldelijk op de
[Function]-toets om het MIDI in/uit-menu te selecteren. Het LCD-venster
toont "xxx Midi In" of "xxx Midi Out".
1. Gebruik de toetsen +[/Yes] en [-/No] of het datawiel om het inkomende
MIDI-kanaal te veranderen: 1 - 16, ALL. Druk gelijktijdig op de toetsen [+/
yes] en [-/No] om de standaardwaarde in te stellen: ALL.
2. Gebruik de toetsen +[/Yes] en [-/No] of het datawiel om het uitgaande
MIDI-kanaal te veranderen: 1 - 16. Druk gelijktijdig op de toetsen [+/yes]
en [-/No] om de standaardwaarde in te stellen: 1.
Automatisch uitschakelen
Druk de [Shift]-toets in, houd deze ingedrukt en druk herhaaldelijk op de
[Function]-toets om het Automatisch Uitschakelen-menu te selecteren.
Het LCD-venster toont "xxx Power Off". Gebruik de toetsen +[/Yes] en [-/
No] om de tijd in te stellen waarna het instrument zichzelf automatisch
uitschakelt. Er zijn drie opties: na 30 minuten, na 60 minuten of helemaal
niet (OFF). De standaard instelling is: 30 minuten.
De mixerfunctie kan het volume van verschillende partijen onderling
regelen. Het is net een kleine mengtafel, die onafhankelijk van elkaar het
volume van de linker- en rechterhandpartijen, het volume van de
baspartij, het volume van de drumpartij en ga zo maar door kan regelen.
1. Druk op de [Mixer]-knop om toegang te krijgen tot het Mixerfunctie-
menu. Het LCD toont "030 Rhythm_s" wanneer je die functie oproept de
eerste keer na het inschakelen. Daarna wordt onthouden welke functie
het laatst werd gebruikt.
2. Druk herhaaldelijk op de [Mixer]-toets om de partij te kiezen die je wilt
bewerken. Gebruik de toetsen +[/Yes] en [-/No] of het datawiel om
parameters te veranderen.
De keuzemogelijkheden en de bijbehorende parameters zijn:
Opmerking:
Dit functiemenu wordt automatisch verlaten wanneer er geen handelingen
worden verricht gedurende 5 seconde.
Volume van het drumspoor
Volume van het percussiespoor
Volume van het basspoor
Volume van het akkoordenspoor 1
Volume van het akkoordenspoor 2
Volume van het akkoordenspoor 3
Volume van het frasespoor 1
Volume van het frasespoor 2
Volume van de rechterzone 1
Volume van de rechterzone 2
Volume van de linkerzone
Functie LCD Bereik Std.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Medeli A 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Medeli A 100 in the language / languages: Dutch as an attachment in your email.

The manual is 5,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info