533426
4
Zoom out
Zoom in
Previous page
1/10
Next page
5
Lactina
®
Breastpump Kit Parts
1a. PersonalFit
Breastshield, Standard (24mm)....................87073
1b. PersonalFit Breastshield Connector ................................87071
1c. Breastshield (1-piece) ..................................................8107089
2. Valve Assembly (2-Part) ................................................8000001
3. Valve ............................................................................8100475
4. Membrane ....................................................................8207013
5. Pump Connector with Plug ..........................................8000649
6. Rubber Seal ..................................................................8200078
7. Piston ............................................................................8100494
8. Vacuum Regulator Ring ................................................8200066
9. Cylinder ........................................................................8100717
10. Tubing............................................................................8007179
11. Milk Collection Container..............................................8117009
12. Container Stand ............................................................8100462
13. Solid Lid for Collection Container ................................8107057
14. Instruction Manual
English/Spanish (not shown) ......................1547477
15. Instruction Manual
English/Fr
ench (not shown)
........................1547476
Item Order Number
Breastpump kits come with either 1-piece breastshields
or PersonalFit Breastshields.
Call for pricing
10
6
7
8
9
1a
1c
1b
11
12
13
3
4
2
5
4
If milk appears in tubing:
1. Turn off the pump and unplug from power source.
2.
Remove and disassemble the tubing, pump connector,
piston, cylinder and filter (parts vary by pump used).
Except for filter*, wash in soapy water, then rinse in
clear cold water. Clean the filter by rinsing in warm
water without soap.
3.
Shake water droplets out of tubing and hang to air-dry.
For faster drying, attach tubing to pump and run pump
1-2 minutes or until dry, or pour a small amount of
isopropyl alcohol through the tubing to dry.
*If using Classic Breastpump parts, DO
NOT USE SOAP, ONLY WATER, TO
CLEAN FILTER. See page 10, #2 for
cleaning instructions.
Care of Piston/Cylinder Assembly:
The inside of the cylinder must be smooth and free of
buildup to ensure long-lasting performance of the rubber
seal. Clean the cylinder, rubber seal, and vacuum regulator
ring every few pumpings with lukewarm soapy water or a
vinegar and water solution to keep these parts working
efficiently. In addition, rotate the piston in the cylinder
every few pumpings to ensure even wear. Only
sterilize/sanitize these parts when the presence of milk is
evident. Be sure the rubber seal is completely dry before
using.
Classic
Filter
Cylinder Rubber Piston
Seal
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Medela Classic at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Medela Classic in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info