561348
16
Zoom out
Zoom in
Previous page
1/46
Next page
Emergency Method (Resets Configuration to Default)
Disconnect the power jack at the rear of the X3D then plug it back in - Now press the on/off button and hold it
pressed for 20 seconds and then release.
After approximately 15 seconds the LED on the X3D will flash blue and you will get a progress bar on your TV
display (some TV's will not display this) wait until the X3D re boots itself +- 60 sec. Your X3D firmware is now
updated.
Download the latest X3D Firmware from www.mede8erforum.com. UnZIP or UnRAR or join with HJ Split and
will find a file named install.img. Copy this file to the root directory of a Flash Drive. Plug the USB Flash drive
into one of the USB Host Ports on the X3D.
DO NOT REMOVE POWER DURING THE EMERGENCY RECOVERY PROCEDURE.
Setup Menu Update with Auto Configuration Restore
Open the Setup Menu and select the “Misc” tab. Now select USB upgrade option. After +- 5 sec the screen will
display the current Firmware Version and the New Firmware Version. You will have the option to select “OK” or
“Cancel”. Select “OK” and the X3D will reboot and after +- 10 seconds the update process will begin. During
the update process the top Navigation Buttons LED will flash and you should see an install progress bar on
your TV screen. After the update is complete the X3D will reboot with the new firmware installed.
If the X3D does not reboot within 5 seconds (after pressing the "Enter" button)
then press the "Home" button to initiate
FIRMWARE UPDATE
The X3D comes with a DLNA DMR function. That stands for Digital Living Network Alliance Digital Media
Renderer. That means another DLNA device can use the X3D to process media without you having to do
anything else with the X3D other than turning it on. Music can be played without having to turn on the TV, or
you can display photo's on your TV directly from your phone.
A Device which controls this process is called a DLNA DMC - Digital Media Controller. You can get DMC apps
for many devices - Android phones / tabs - Iphone / Ipad. Android Honeycomb dosn't come with a DMC
installed. Android Market has a lot of them, but not all are able to detect both the X3D's DMR, and the X3D's
Upnp server successfully. Bubbleupnp has been tested with X3D and we suggest that this is a good app to
start playing and testing DLNA DMR functionality. Remember to turn the DMR ‘on’ in the X3D Setup Menu.
DLNA DMR
Page15
REMOTE CONTROL OVER NETWORK
Enable the Web Remote in the Setup Menu. Remote Control the X3D from a mobile device such as a iPhone,
iPad or any device that has WiFi and a built in Web Browser. Enter the X3D IP into your Web Browser with the
correct Port number eg http://xxx.xxx.xxx.xxx:1024 “x” is your actual IP
Power Up and hold on/off
button for 10 seconds
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mede8er MED800X3D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mede8er MED800X3D in the language / languages: English as an attachment in your email.

The manual is 4,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Mede8er MED800X3D

Mede8er MED800X3D User Manual - Dutch - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info