585419

Mebus C-8169 - 10357 Manual

24
Zoom out
Zoom in
Previous page
1/30
Next page
23
NOTE:
To activate pre-alarm function, ALARM must be on.
Temperature alarm ON Pre-alarm mode Pre-alarm 15 minutes
VIEWING THE CHANNEL
The default channel is channel 1. In normal time mode, press UP key to view the channel
from 1 to 3.
HOW TO READ INDOOR AND OUTDOOR TEMPERATURE & HUMIDITYRECORDS
Change the temperature unit by sliding °C / °F slide switch to °C for Centigrade or °F for
Fahrenheit.
If the readings go above or below the specified range, the receiver and transmitter will keep
show the last record within the operation range.
NOTE:
1. If no signals are received or the transmission is interfered with, “---” appears
in the display.
2. Locate the clock in other position and make sure the transmission is within the
effective range of 30 meters approx.
3. After several trials but in vain, please reset the clock thoroughly. Try out where
your multifunctional alarm clock receives the signals best.
CHECKING AND DELETING MAX./MIN. TEMPERATURE & HUMIDITY REOCRDS
1. Press MAX/MIN key to check Maximum temperature and humidity records. Press it
twice to check the Minimum records. Press it thrice to exit.
2. Press and hold MAX/MIN key for 3 seconds to delete the records.
MAX. Temperature record MIN. Temperature record
REGLER LE REVEIL TEMPERATURE
Utiliser cette fonction pour être réveillé à un moment déterminé plus tôt (1-90 minutes), si
l’une des températures du transmetteur est en dessous de -3°C.
1. Dans le mode horloge normal, appuyer sur la touche ALARM deux fois pour
accéder au mode pré réveil, appuyer sur la touche UP ou DOWN pour activer le
pré réveil.
2. Appuyer et maintenir la touche ALARM pendant 2 secondes, l’heure de pré réveil
clignote, appuyer sur la touche UP ou DOWN pour changer sa valeur.
NOTE :
Pour activer la fonction de pré réveil, ALARM doit être activé.
VISUALISER LE CANAL
Le canal par défaut est le canal 1. En mode normal d’horloge, appuyer sur la touche HAUT
pour visualiser le canal de 1 à 3.
COMMENT LIRE LES ENREGISTREMENTS DE TEMPERATURE ET D’HUMIDITE INTERIEURS
ET EXTERIEURS
Changer l’unité de température avec l’interrupteur °C/°F de °C pour Centigrade à °F pour
Fahrenheit.
Si les relevés vont en dessous ou au dessus de la portée spécifiée, le récepteur et le
transmetteur afficheront le dernier relevé dans la portée de fonctionnement.
NOTE :
1. Si aucun signal n’est reçu ou la transmission a des interférences, “ --- ” apparaîtra
à l’affichage.
2. Placer l’horloge dans une autre position et s’assurer que la transmission s’effectue
dans la portée effective de 30m approx.
3. Après plusieurs essais en vain, veuillez réinitialiser entièrement l’horloge. Essayer
là où votre horloge multifonctionnelle reçoit le signal le mieux.
Réveil désactivé Réveil activé Réveil et snooze activés
Réveil température activé Mode pré réveil Pré réveil 15 minutes
36
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mebus C-8169 - 10357 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mebus C-8169 - 10357 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 4,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info