585419

Mebus C-8169 - 10357 Manual

21
Zoom out
Zoom in
Previous page
1/30
Next page
39 20
3. RESET:
- Return all values to default value.
4. °C / °F slide switch:
- Switch between °C and F° display.
5. Battery compartment:
- Accommodates 2 AA size batteries.
6. Battery door
7. Wall mount holder:
- Supports the transmitter in wall mounting.
8. Folding table stand.
BEFORE YOU BEGIN
TRANSMITTER:
1. Remove the removable stand and screws the back cover off the transmitter.
2. Insert 2 x AA batteries into the battery compartment. Be sure to insert them the right way round
(see polarity information +/- in the battery compartment).
3. The receiver can receive humidity and temperature data from up to 3 transmitters.
Assign the channel to each transmitter, Channel 1, 2 or 3 respectively by sliding the
switch besides the battery compartment.
4. Press the reset key of the transmitter individually by a pin to confirm the channel setting.
5. Select the temperature unit by sliding the °C/°F switch besides the battery compartment.
6. Re-fix the battery door, and secure its screws evenly and diagonally.
NOTE:
1. Once the channel is assigned to a transmitter, you can only change it by removing the
batteries or resetting the unit.
2. Avoid placing the transmitter in direct sunlight, rain or snow.
WEATHER STATION:
1. Remove the battery door and insert 3 x AA batteries into the battery compartment.
Make sure you insert the batteries the right way round (see polarity information +/
- in the battery compartment).
2. Close the battery compartment.
3. Press reset button to re-start the clock and it will synchronize the channels of the
transmitter automatically.
NOTE:
1. If extra transmitter is added in the future, press reset button to re-start the clock and synchronise
the channel once again.
2. The building material and the position of the receiver and transmitter affect the effective
range. So try various locations will help to obtain the best result.
INDICATEUR DE PILES FAIBLES
Lorsque les piles n’ont plus assez de puissance pour faire fonctionner l’unité, l’écran
LCD du récepteur deviendra clair, et l’indicateur de piles faibles apparaîtra pour vous
rappeler de les remplacer par de nouvelles piles.
Indicateur de piles Indicateur de piles faibles
faibles du transmetteur du transmetteur
(indiqué sur le transmetteur) (indiqué sur l’unitéprincipales)
Indicateur de piles faibles du récepteur
NOTE :
Attention à jeter l’unité usagée et les piles de manière responsable vis-à-vis de
l’environnement.
UTILISER LE SUPPORT DE TABLE OU MURAL
Le récepteur a une structure de bureau et murale. Fixer le support mural séparé au mur avec
une vis. Pousser le support de l’horloge vers le haut, l’accrocher au support mural par les
trous cachés.
Pour le transmetteur, fixer le boîtier de support mural au mur ou le placer simplement sur une
table.
CH
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mebus C-8169 - 10357 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mebus C-8169 - 10357 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 4,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info