632901

Meade Goto-Kit for equatorial EQ-5 Mounts Manual

28
Zoom out
Zoom in
Previous page
1/40
Next page
28
Instruction Manual
move the telescope‘s optical tube and center this object in the telescope
eyepiece.
2. Display the „Setup: Targets“ menu option. Choose „Terrestrial“ and press
ENTER. „Setup: Targets“ displays again. Choosing this option turns off
tracking for astronomical objects which is not useful for the viewing of ter-
restrial objects such as those in the Landmark database. Be sure to change
this option back to „Astronomical“ when you wish to view celestial objects
again.
3. Press MODE once. „Select Item: Setup“ displays.
4. Press the Scroll Down key once and „Select Item: Object“ displays. Press
ENTER. „Object: Solar System“ displays.
5. Press the Scroll Up key twice and „Object: Landmarks“ displays. Press
ENTER. „Landmark: Select“ displays.
6. Press the Scroll Down key once. „Landmark: Add“ displays. Press ENTER.
7. „Landmark Name“ displays. Using Arrow keys, enter a name for the land-
mark you wish to add to the database. When finished, press ENTER.
8. „Center Landmark. Press Enter“ displays. Using only the Arrow keys (do not
manually move the telescope), move the telescope to the desired landmark
and center the object in the eyepiece. Press ENTER. The object is now
stored in memory.
9. „Landmark: Add“ displays. If you wish to add more landmarks, repeat steps
5 through 7.
To Select a landmark from the database
1. Make sure the telescope is located and aligned exactly as when the desired
landmark was entered into memory.
2. Display the „Landmark: Select“ menu option. Press ENTER.
3. Use the Scroll keys to scroll through the list of objects you have previ-
ously entered. When the desired object displays, press ENTER to select the
object.
Use the Scroll keys to scroll through location information about the object,
if desired. Press GO TO to slew the telescope to the landmark.
4. Press MODE to exit.
To perform a Landmark Survey
This procedure allows you to perform a tour of the objects entered in the „Object:
Landmark“ menu option — note that the Landmark Survey will function only if
you have previously entered objects in the Landmark menu.
1. Navigate to the „Utilities: Landmark Survey“ menu and press ENTER.
2. „Landmark Survey: Slewing...“ displays. The telescope moves to the first
object on the Survey list and displays the name of the object.
3. Press MODE to pause the Survey. Press ENTER to restart the survey at the
first object of the survey.
To Check on the Available Memory
The handbox has a limited amount of memory. Once you begin to store
Landmarks, user objects and other bits of information in the handbox, you will
begin to use up memory. This procedure allows you to check on how much
memory is still available.
1. Navigate to the „Setup: Statistics“ menu option and press ENTER.
2. „Statistics: 37.2K Char. Free“ displays. This is the amount of memory that is
still available to the user.
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meade Goto-Kit for equatorial EQ-5 Mounts at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meade Goto-Kit for equatorial EQ-5 Mounts in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info