Manual Meade ETX-105AT (page 52 of 60) (English)

470208

Zoom out

Zoom in

1/60

However, owners who wish to perform astrophotography or use the Meade LPI (see

PHOTOGRAPHY WITH MEADE’S AUTOSTAR SUITE, page 42, for more information) will find

equatorial mounting indispensible to their needs.

Equatorial Mount

Equatorial mounting lines up the telescope’s polar axis with the North Celestial Pole (or the

South Celestial Pole if observing in the southern hemisphere).

When using an equatorially mounted telescope, tracking (following) celestial objects is

possible by turning on your ETX telescope's motor drive. The motor counteracts the Earth's

rotation and keeps objects in the field of view of the eyepiece for hands-off tracking.

Equatorial Mounting Procedure

1. Assemble the tripod as described in Step #2 of How to Assemble Your Telescope and

Tripod

, page 12.

2. Loosen the latitude control latch (

1, Fig. 43) and lift up the tilt-plate (2, Fig. 43) so that

you can easily access the underside of the plate. Relock the latitude

control latch, so the assembly doesn't slip while you are attaching the telescope.

3. Turn the tripod, so that the face of the tilt-plate points North (

Figs. 47 and 48). If you

attach the telescope to the tripod indoors, be sure to orient the face of the tilt-plate to

point North after moving the telescope outdoors. Equivalently, point the tripod leg (

Fig. 47) North. This is the leg opposite from the latitude control bar (4, Fig. 47).

4. Line up the mounting hole on the base of the telescope labeled "High Latitude Leg"

with the attachment knob that is closest to the latitude control bar (

see Fig. 44). Line

up the other mounting hole with the remaining attachment knob. Thread both

attachment knobs into the base of the telescope. Tighten to a firm-feel only.

5. Determine the latitude of your observing location from a road map, atlas or the

LATITUDE CHART FOR MAJOR CITIES OF THE WORLD, page 55. Loosen the

latitude control latch (1, Fig. 46) and adjust the latitude control bar (4, Fig. 46) so that

your observing site's latitude is just visible above the flat surface of the tripod head.

Retighten the latch.

6. If you have not already done so orient the tripod leg (see

Step #3 and 5, Fig. 47) so

that it is pointing due North (if the location of Polaris, the North Star, is known, point

the telescope directly at Polaris. Observers located in the Earth’s Southern

Hemisphere must point the telescope due South).

7. The telescope is now equatorially mounted; the tripod must not be moved or else the

alignment will be lost. Instead, use one of the following methods to move the

telescope's optical tube to a desired celestial object.

(a) Loosen the vertical and/or horizontal locks (

6 and 9, Fig. 1) to permit the optical

tube to be freely moved manually. Tighten the locks once you center on the

object.

(b) With the horizontal and vertical locks in their “locked” positions, use the Arrow

keys to move the optical tube.

Note: For most astronomical observing requirements, approximate

settings of the telescope's latitude and North-pointing tripod leg (

Steps #5

and #6) are acceptable. Do not allow undue attention to precise equatorial

mounting of the telescope to interfere with your enjoyment of the instrument.

Using an Equatorially Mounted Telescope

Once your telescope is equatorially mounted, the telescope motor drive will keep a

celestial object in the telescope eyepiece's field of view.

To Track a Star When Polar Mounted:

Make sure you have initialized your telescope before you try out this feature (see

INITIALIZING AUTOSTAR, page 18).

1. Tighten the vertical and horizontal locks (

6 and 9, Fig. 1) if necessary.

2. Make sure that Autostar is connected to the HBX port (

C, Fig. 2) of the

telescope’s computer control panel.

3. Flip the telescope power switch (

A, Fig. 2) to the ON position.

The Autostar screen displays a copyright message displays, followed by a short beep.

Then Autostar takes a few moments to start up the system.

4. A message displays that warns not to look at the Sun. At the end of this message,

press the key prompted by Autostar to signify that the message has been read and

understood.

Fig. 45: Attach telescope to

tripod.

Fig. 44: High latitude leg

mounting hole and

corresponding attachment

knob.

High latitude

leg mounting

hole.

Attachment

knob.

ᕢ

Fig. 43: Loosen control latch.

Latitude

control

bar.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Meade ETX-105AT in the language / languages: English as an attachment in your email.

The manual is 4,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Meade ETX-105AT Manual

Product: