Manual Meade DS-114AT (page 4 of 38) (English)

608146

Zoom out

Zoom in

1/38

QUICK-START GUIDE

1. Remove the optical tube and tripod from the gift-

box.

Perform this setup on a flat, stable surface. It is rec-

ommended that you perform this operation in the day-

time or in bright light the first time you assemble the tel-

escope.

The optical tube assembly is shipped with the cradle

rings, yoke mount, and tripod attached. Carefully

remove the assembly from the box. Lay the assembly

on the floor.

2. Remove the optical tube from the mount.

The optical tube is shipped oriented the wrong direction

in the yoke mount for observing—you must remove the

tube from the mount and turn it around 180°.

Loosen the cradle ring lock knobs and move the knobs

out of the way so that you can open the cradle rings.

Once the rings are open, remove the optical tube from

the cradle rings.

3. Stand the tripod and orient the cradle rings.

Stand the tripod on a flat surface and gently pull the

legs apart to a fully open position. Turn the cradle rings

so that the ring base is horizontal (parallel) to the

ground. Tighten the alt lock (A) to a firm feel, so the

rings remain in that position.

This Quick Start procedure explains how to set up your DS-114AT for manual viewing. If you wish to make observations

using the Autostar handbox, please turn to

HOW TO ASSEMBLE YOUR TELESCOPE, page 10 and take the time and care

necessary to assemble all the components that are supplied with this telescope.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Meade DS-114AT in the language / languages: English as an attachment in your email.

The manual is 0,64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Meade DS-114AT Manual

Product: