807135
17
Zoom out
Zoom in
Previous page
1/20
Next page
17
TROUBLE SHOOTING
---------------------------------------------------------------------------------------------------------------------------------------
TROUBLE
CAUSE
SOLUTION
Unit does not
operate
No power to the unit.
Plug in the unit, check power at outlet.
On/Off button not turned ON.
Turn the unit on.
Humidity below the set point.
Adjust the target if necessary.
Doesnt
dehumidify or
collects little
water
Ambient temperature is low.
As temperatures drops then
dehumidification will drop as well.
This is unavoidable.
Ambient temperature exceeds +36°C.
This is above the working range of the
dehumidifier.
The ambient air humidity is lower than
40%rh.
Under this condition the dehumidifier
becomes inefficient and little water
will be collected. This is normal for a
compressor dehumidifier.
The air filter is dirty and blocked.
The air filter must be exchanged.
The ambient is below the relative
humidity set point.
This is normal and is not a fault.
Compressor is
not on
The dehumidifier has just turned on.
Wait 3 minutes for the compressor to
start up.
Unit is in defrost mode, defrost symbol
appears on the display.
This is normal and is not a fault.
The fan is not
running
Relative humidity is below the set point.
This is normal and is not a fault. This
can be changed, see the control
panel section of the manual.
The room temperature is lower than
+10ºC.
Assure that the device is only set up
in rooms with temperatures above
+10°C.
Unit does not
defrost
Conditions are below +10°C.
Move the dehumidifier to a warmer
space.
Defective bypass relay valve.
Contact Meaco.
Codes P1 to P8
&/or E0 appear
(excluding P3)
Turn off for one hour and then restart.
If the unit still does not work, contact
Meaco.
P3 only
Condenser coil temperature too high.
Run the fan for 30 minutes, if it
continues then disconnect power for
one hour and try again.
Buttons do not
work
Child lock is activated.
Hold the ON/OFF button for 5
seconds.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meaco Wall 53 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meaco Wall 53 in the language / languages: English as an attachment in your email.

The manual is 1.25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Meaco Wall 53

Meaco Wall 53 User Manual - German - 19 pages

Meaco Wall 53 User Manual - Dutch - 19 pages

Meaco Wall 53 User Manual - French - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info