10 [EN]
The Modes
---------------------------------------------------------------------------------------------------------------------------------------
Cool Mode
1. Press the Mode Button until the LED light next to Cool on the display appears.
2. Press the Up and Down arrows to adjust the temperature displayed. The temperature can be
set between 16°C and 32°C. The portable air conditioner will run until the desired temperature
is reached (the compressor will turn off, but the fan will continue to run). If the temperature in
the environment increases above the target temperature, the portable air conditioner will
automatically come back on.
3. Press the Fan Speed Button to change the fan speed between High and Low. An LED light will
appear on the display indicating the chosen fan speed.
4. To control the direction of air flow horizontally, adjust the inner louver from left to right manually.
Dry Mode
1. Press the Mode Button until the LED light next to Dry on the display appears.
2. The portable air conditioner will run according to the ambient temperatures below:
> 25°C: The compressor runs for 15 minutes and then stops for 3 minutes. The fan will run
continuously.
25°C to 20°C: The compressor runs for 10 minutes and then stops for 3 minutes. The fan
will run continuously.
20°C to 15°C: The compressor runs for 6 minutes and then stops for 3 minutes. The fan
will run continuously.
< 15°C: The compressor will stop working and therefore stop drying. When the temperature
reaches 17°C the unit will run as per above.
3. The fan speed cannot be changed in this mode – it will automatically revert to low fan speed.
4. A desired temperature cannot be selected in this mode.
5. The drainage hose should be attached for continuous operation (see page 14). The duct does
not need to be attached in this mode, however, if the duct is not attached the noise level and
the room temperature will increase.
Fan Mode
1. Press the Mode Button until the LED light next to Fan on the display appears.
2. Press the Fan Speed Button to change the fan speed between High and Low. An LED light will
appear on the display indicating the chosen fan speed.
3. A desired temperature cannot be selected in this mode.
4. In Fan Mode the room air is circulated but not cooled. To control the direction of air flow
horizontally, adjust the inner louver from left to right manually.