10 [EN]
The Modes
---------------------------------------------------------------------------------------------------------------------------------------
Cool
1. Press the Mode Button until the LED light next to Cool on the display appears.
2. Press the Up and Down arrows to adjust the temperature displayed. The temperature can be
set between 16°C and 32°C. The portable air conditioner will run until the desired temperature
is reached. The portable air conditioner will run until the desired temperature is reached (the
compressor will turn off, but the fan will continue to run). If the temperature in the environment
increases above the target temperature, the portable air conditioner will automatically come
back on.
3. Press the Fan Speed Button to change the fan speed between High, Middle and Low. An LED
light will appear on the display indicating the chosen fan speed.
4. To control the direction of air flow horizontally, adjust the inner louver from left to right manually.
Dry
1. Press the Mode Button until the LED light next to Dry on the display appears.
2. The portable air conditioner will run according to the ambient temperatures below:
> 25°C: The compressor runs for 15 minutes and then stops for 3 minutes. The fan will run
continuously.
25°C to 20°C: The compressor runs for 10 minutes and then stops for 3 minutes. The fan
will run continuously.
20°C to 15°C: The compressor runs for 6 minutes and then stops for 3 minutes. The fan
will run continuously.
< 15°C: The compressor will stop working and therefore stop drying. When the temperature
reaches 17°C the unit will run as per above.
3. The fan speed cannot be changed in this mode – it will automatically revert to low fan speed.
4. A desired temperature cannot be selected in this mode.
5. The drainage hose should be attached for continuous operation (see pages 13 and 14).
Fan
1. Press the Mode Button until the LED light next to Fan on the display appears.
2. Press the Fan Speed Button to change the fan speed between High, Middle and Low. An LED
light will appear on the display indicating the chosen fan speed.
3. A desired temperature cannot be selected in this mode.
4. In Fan Mode the room air is circulated but not cooled.
5. To control the direction of air flow horizontally, adjust the inner louver from left to right manually.