643529

MCZ Vivo 90 Wood Manual

21
Zoom out
Zoom in
Previous page
1/42
Next page
Chapter 4
INSTALLATION AND USE MANUAL
page 21
Installation and assembly Technical service – MCZ Group S.p.A. all rights reserved - Reproduction prohibited
Dry install the fire bed of the cladding, leaving an aperture of 1 cm
between the fireplace stove and the fire bed to provide insulation.
4.8. INSULATING A WOODEN BEAM
The wood beam must be protected with adequate insulation
from heated parts to prevent the risk of fire or damage of the
cladding.
(figure 10)
4.9. INSULATION OF FIREPLACE STOVE
The fireplace stove must also always be separated from nearby
walls and ceilings.
If necessary, use insulating materials to insulate the walls that are in
contact with the unit if they may be damaged or catch fire (walls made
of wood, plasterboard, etc.).
(figure 11)
Measurements for insulation are shown in chap 4.4
4.9.1.
Hood ventilation nozzles.
You must
install MCZ ventilation nozzles, or nozzles
that ensure the same operation and the same air
passage cross section (see MCZ accessories).
MCZ non risponde di eventuali danni alla struttura o
alla componentistica elettrica causati dalla mancata
osservanza di questa avvertenza.
For proper operation of room ventilation remember that:
In the lower part of the cladding, an opening for the entry of
convective air must be provided that is not smaller than 400
cm
2
In the upper part it is necessary to provide a vent opening (in
addition to the ducted air outlets) of at least 230 cm
2
to release
into the room the residual heat that accumulates inside the
cladding. With the COMFORT AIR kit, however, this outlet is
not necessary, because the heat in the cladding is indirectly
drawn in by the fans.
Besides ensuring perfect product operation, this action makes it
possible to recover part of the heat from the structure, which would be
wasted if it were left inside the cladding.
For better understanding of the number, size and function of the
ventilation nozzles to be installed on the cladding, the following are
some possible installation configurations with the relative nozzles.
1a) Grille for convection air outlet
1b) Grille for intake of convection air
Grilles 1a and 1b are essential for releasing the heat that
builds up in the hood. They must be installed, regardless of
the type of installation or cladding to be realized.
Figure 11 – Insulation of unit from walls and
from cladding
INSULATION
1a
1b
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MCZ Vivo 90 Wood at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MCZ Vivo 90 Wood in the language / languages: English as an attachment in your email.

The manual is 2,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info