643408
25
Zoom out
Zoom in
Previous page
1/64
Next page
23
5-INSTALLATION AND ASSEMBLY
Technical Dept. - All rights reserved - Reproduction is prohibited
POSITIONING
Before placing the product, assess optimal positioning condition.
The product can be installed in an already existing traditional replace or as new installation.
Furthermore, to raise the product, an iron support may be purchased separately (see special accessory price list - optional) or a platform
may be constructed on site as long as stability and safety of the Vivo 90 insert is assured.
The optional support raises the product by min. 50 cm to 65 cm maximum. This product may also be installed close to the oor without
using the optional pad. However, MCZ recommends complying with the safety measurements.
In any case, during installation the following factors should be taken into consideration to decide the height at which the insert is to be
placed:
the dimensions of any cladding
annual cleaning (see special section) since the inspection caps are underneath the product, therefore if it is placed too close to the
oor (see minimum measurements set out in this manual) the product will have to be completely extracted from its housing.
INSTALLATION ON AN EXISTING FIREPLACE
Evaluate the following elements:
The product’s support plane must have the following features:
withstand the weight of the product and any accessories
it should be strong enough to allow anchoring with dowels for securing
perfectly level
the shoulders as perpendicular as possible to the plane
the housing compartment must be suciently wide to house the product.
After ascertaining the required conditions for correct installation, proceed with assembling the product:
fasten the base of the the product to the support
perform the various connections to the ue complying with all regulations in force.
Any space between the walls of the cladding and the product may be closed with a compensation frame which must be easily detachable
in case of insert maintenance.
It is obligatory to fasten the product to the support, as it might tip over during product extraction.
It is required to ensure all connections (hydraulic and electric) allow for the product to be extracted.
NEW INSTALLATION
Evaluate the following elements:
The product’s support plane must have the following features:
withstand the weight of the product and any accessories
it should be strong enough to allow anchoring with dowels for securing
perfectly level
After ascertaining the required conditions for correct installation, proceed with assembling the product:
fasten the base of the the product to the support
perform the various connections to the ue complying with all regulations in force.
It is obligatory to fasten the product to the support, as it might tip over during product extraction.
It is required to ensure all connections allow for the product to be extracted.
Proceed with installing the cladding.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MCZ Vivo 90 Pellet Comfort Air at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MCZ Vivo 90 Pellet Comfort Air in the language / languages: English as an attachment in your email.

The manual is 5,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of MCZ Vivo 90 Pellet Comfort Air

MCZ Vivo 90 Pellet Comfort Air Usermanual and installation guide - Dutch - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info