643410
54
Zoom out
Zoom in
Previous page
1/74
Next page
52
7 - CONTROL PANEL
SETTING A CUSTOMISED PROGRAMME
The selectable daily programmes are 62 and one can choose a dierent program for every day of the week.
To activate this option proceed as described above to set a weekly programme, only that instead of selecting one of the programs contained
in the weekly programmes table (from P01 to P10) select the USER programme. Once the USER programme has been selected, press SET
and the wording Mo P00 (where P00 ashes) appears in the centre of the display, while in the lower part CUSTOMISE appears, by pressing
the relative key (at the bottom on the right or left) one can enter the daily programme. By scrolling with the key at the bottom on the right
or left of the control panel, one can choose the desired programme from 1 to 62. Once the desired programme has been chosen for the
active day (e.g. no.32 for day MO = Monday) press the OK key at the top on the right and the wording Tu P00 (where the wording P00 will
ash) will appear on the display, continue with this programming procedure up to day Su=Sunday.
If for a day of the week one does not wish to set any programme, select program 00, conrm with OK and continue
programming.
If there is a chrono programme active but the user decides to switch the product on or o beforehand, the command
given by the user will be considered more important than the chrono one and therefore overrides it. The following
chrono command is obviously ignored.
Example: if the chrono programme entails switching the appliance on at 10:00 but the user is cold at 9:00 and wishes
to switch it on, the product can be switched on by pressing button no.5. At 10:00 the chrono programme, which
entailed switching the stove on, will be ignored because the appliance is already on.
IMPORTANT NOTE
Product start-up requires 10/15 minutes.
Take this into account when setting the start time. Likewise, stove shutdown requires about 30 minutes, during
which the heat stored up by the stove is released into the room.
Keep this in mind for substantial fuel savings.
CHRONO DEACTIVATION
To deactivate the CHRONO mode access the programming menu again and conrm OFF.
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MCZ Vivo 80 Pellet Hydro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MCZ Vivo 80 Pellet Hydro in the language / languages: English as an attachment in your email.

The manual is 12,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of MCZ Vivo 80 Pellet Hydro

MCZ Vivo 80 Pellet Hydro Usermanual and installation guide - Dutch - 64 pages

MCZ Vivo 80 Pellet Hydro Usermanual and installation guide - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info