643409

MCZ Vivo 80 Pellet COMFORT AIR Manual

37
Zoom out
Zoom in
Previous page
1/60
Next page
8:20
26
FR
20
°C
TIMER
°C
P1
8:20
26
FR
20
°C
TIMER
°C
P1
12:07
31
°C
TU
23
°C
TIMER
ECO
12:06
31
°C
TU
23
°C
ECO
8:20
26
FR
20
°C
TIMER
°C
P1
12:07
31
°C
TU
23
°C
TIMER
ECO
12:06
31
°C
TU
23
°C
ECO
35
8-LCD REMOTE CONTROL
Technical Dept. - All rights reserved - Reproduction is prohibited
TIMER MODE (TIMER)
Select this operating mode to switch the product on and o automatically, according to 6 customised time bands (P1 – P6). The following
can be set for each time band:
• start-up time.
• Shutdown time.
• Desired room temperature during that time band.
• Days of the week when the time band is to be activated.
When the product is switched on (manually via button A or automatically via a time band), it operates in the automatic mode, described
above. A time band appears automatically when it is active (P1 in gure 3) and the desired temperature is changed to the value set in the
time band. However, the user can always modify this value as desired and in real time.
Refer to "Timer Settings" to learn how to set the time bands.
ECO MODE (ECO)
This mode is activated/deactivated by pressing key B for 5" on the remote control while it is switched on.
ECO is an automatic mode with the only dierence that if the set temperature is reached and remains so for the subsequent 20 minutes
(despite ame modulation), the product is switched o and remains on stand by until the room temperature drops 2 degrees below the
desired temperature (and in any case for at least 5 minutes from the last shutdown). The product is then switched on again. Figure 4
If the room is not suciently insulated, ame modulation does not allow the set temperature to be met for 20 consecutive minutes and
the product will not go o.
NOTE: It is recommended to use the ECO mode only in well-insulated rooms in order to prevent start-up and shutdown from
occurring within short periods of time.
The remote control remains on even when the product is o when in ECO mode, in order to indicate that this shutdown is only temporary.
Obviously, if the product is switched o from key A, ECO mode is exited and the product remains o.
Up to 6 automatic start-up and shutdown time bands (E1 – E6) can also be set in ECO mode, which are independent from those of TIMER
mode (P1 – P6). If they have been activated, TIMER-ECO appears on the display (gure 5) permanently, even if the remote control is
switched o.
Refer to "Timer Settings" to learn how to set the time bands.
NOTE: If the remote control is switched o in TIMER mode, ECO mode can only be re-activated by the user (key A) or when
started-up by the next valid time band. Combined use of TIMER and ECO modes requires a good knowledge of the product
operating logic.
FIGURE 3.
FIGURE 4
FIGURE 5
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MCZ Vivo 80 Pellet COMFORT AIR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MCZ Vivo 80 Pellet COMFORT AIR in the language / languages: English as an attachment in your email.

The manual is 4,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of MCZ Vivo 80 Pellet COMFORT AIR

MCZ Vivo 80 Pellet COMFORT AIR Usermanual and installation guide - French - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info