643409

MCZ Vivo 80 Pellet COMFORT AIR Manual

27
Zoom out
Zoom in
Previous page
1/60
Next page
765
610
N R
B M
25
5-ASSEMBLY
Technical Dept. - All rights reserved - Reproduction is prohibited
PRODUCT INLET HOLE
The hole made on the wall must be 765*610 mm. These measurements allow the frame to cover the gap that remains between the
product and the hole and also allow the product to be removed if maintenance is to be performed and/or parts are to be replaced.
FITTING THE CHUTE AT THE FRONT
Proceed as follows if the pipe is to be positioned at the front:
• Connect the supplied pipe to the product, making sure it is turned to the front, and fasten it with the clamp.
• Connect the pipe to the opening of the door structure with the supplied clamp.
• Position the pipe in such a way that it is accessible once the cladding is completed and for the door structure to be fastened to the
preset hole on the wall of the cladding itself.
• Refer to the relative paragraph to t the external door, since this is to be carried out once the cladding is completed.
CONNECTING THE SWITCH AND CONTROL PANEL
The control panel and switch are already tted on the pellet loading door and connected to the respective wires by the manufacturer.
Connect the wire of the switch to the socket on the rear side of the product.
The wire of the control panel must be connected to the electric board in position 1. T
o x the switch to the pellet loading hatch one must temporarily disconnect the cables. Reconnect the cables to the relative terminals as
shown in the gure.
N = BLACK
R = RED
B = BLUE
M = BROWN
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MCZ Vivo 80 Pellet COMFORT AIR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MCZ Vivo 80 Pellet COMFORT AIR in the language / languages: English as an attachment in your email.

The manual is 4,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of MCZ Vivo 80 Pellet COMFORT AIR

MCZ Vivo 80 Pellet COMFORT AIR Usermanual and installation guide - French - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info