643528

MCZ Vivo 70 Wood Manual

40
Zoom out
Zoom in
Previous page
1/42
Next page
Chapter 7
INSTALLATION AND USE MANUAL
page 40
Maintenance and cleaning Technical service – MCZ Group S.p.A. all rights reserved - Reproduction prohibited
7. MAINTENANCE AND CLEANING
ATTENTION!
All cleaning operations of all parts should be
conducted with the fireplace stove cold.
7.1. CLEANING TO BE PERFORMED BY THE USER
7.1.1. Cleaning the glass
Specific products can be used to clean the glass (see our price list), a
cloth dampened with water and ammonia or a bit of white ash and a
newspaper.
Completely lower the door (
figure 21)
when cleaning the glass
ATTENTION!
Do not spray the product on the painted parts or on
the gaskets of the door (ceramic fibre cord)
7.1.2. Cleaning out the ashes
This must be done when the fireplace stove is off and cold.
It is advisable to adequately clean the fire bed for proper combustion.
To remove the ashes from the fire bed, use a metal scoop and brush.
Place the ashes in a non-flammable container for transport.
Ashes that are still hot should be kept outdoors with great
care, and not placed in a waste container. Leave them to cool
down in the open air in a metal container.
7.1.3. Cleaning the refractory material walls (ALUTEC
®
)
They do not require any cleaning, since the feature of this material
(ALUTEC
®
) is that it does not absorb soot but rather repels it when the
fire box is hot. During the lighting phase, during which the fire box
tends to blacken, the refractory materials will turn white again, starting
from the base of the flame, when the combustion chamber reaches its
operating temperature (~ 400° C).
If this does not happen, it may be due to the following:
Humid or resinous wood that does not release enough heat or
that dirties the combustion chamber
(see chapter 5.3)
Flue pipe with poor performance resulting in smoke remaining
too long in combustion chamber, dirtying the fire box.
Flue pipe with poor performance which does not allow fireplace
stove to reach high yield that results in adequate temperature of
the refractory material.
Never clean the refractory material with a damp cloth
or anything else, as it may be stained.
Use a dry paintbrush if necessary to remove heavy
soot build-up.
Figure 21 – Opening the door
… 40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MCZ Vivo 70 Wood at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MCZ Vivo 70 Wood in the language / languages: English as an attachment in your email.

The manual is 2,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info