643528
18
Zoom out
Zoom in
Previous page
1/42
Next page
Chapter 4
INSTALLATION AND USE MANUAL
page 18
Installation and assembly Technical service MCZ Group S.p.A. all rights reserved - Reproduction prohibited
This mode allows a proper mix of the air in the room of installation
and better cooling of the structure of the fireplace stove.
(Figure 6)
ALWAYS
CONNECT THE TWO DUCTS AND RUN THEM
OUTSIDE. IF YOU DO NOT COMPLY WITH THIS RULE,
THE FAN MAY DRAW IN THE AIR INTENDED FOR
COMBUSTION
Remember that:
All of the air intakes must be equipped with shutters than can
be controlled from the outside and that are equipped with
insect protection.
The air intake section is considered net, therefore the area of
any obstructions must be considered (mesh, etc.)
The filters or meshes need to be cleaned periodically to ensure
air can pass through them.
Do not for any reason obstruct the air intakes if the
fireplace stove or ventilation kit is in operation
4.4. POSITIONING
The VIVO fireplace stove can be placed in a corner or along a wall.
It can be installed at the desired height, providing a suitable support
during work.
Always evaluate the structural condition of the surface which
will take the weight, and always leave a minimum 5 cm
airspace between the stove and any walls.
Install dry the fire bed of the cladding leaving an opening of 1 cm
for the insulation.
For installation near flammable material, comply with the
following minimum safe distances:
(Figure 7)
A = 100 mm (distance from the sides and back)
B = 80 mm (insulating material)
C = 200 mm (height above floor)
If the stove is positioned over a floor or close to
walls made of flammable materials, it is advisable to
use sufficient insulation.
Figure 6 – Air intakes for ducts of fan and
combustion air intake.
A
A
A
B
B
C
Figura 7 – Installation near flammable
material
B
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MCZ Vivo 70 Wood at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MCZ Vivo 70 Wood in the language / languages: English as an attachment in your email.

The manual is 2,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info