812511
36
Zoom out
Zoom in
Previous page
1/68
Next page
36
22-USER MENU
USER MENU
Pressing the button continuously for 5” grants access to a user menu scrolled with the buttons.
The TIME OUT to exit this screen is 2 minutes, unless you forcibly exit with .
The selection box indicates the item you are selecting and moves with .
Press to select the menu item.
Press to conrm your choices and exit.
The user menu has the following items:
•  INFO = Display of the most important operating parameters
•  SW/FW: Display of SW/FW versions
•  DATE AND TIME= date and time settings
•  NTC 1: room probe or room thermostat
•  NTC 2: NTC2 probe status display (puer HIGH probe) as entered in the INSTALLATION SET menu. The output can be a dry contact
(T.EXT); in this case, ON/OFF will appear instead of the temperature.
•  NTC 3: NTC3 probe status display (STORAGE TANK probe) as entered in the INSTALLATION SET menu. The output can be a dry contact
(T.EXT); in this case, ON/OFF will appear instead of the temperature.
•  It can also be used as the average temperature reading probe for the puer (T.MED) with INSTALLATION SET 5-6.
•  AUX : Conguration of the rear terminal outputs (contacts 7-8-9) based on 4 dierent uses:
o OFF = Not enabled- DEFAULT of all system congurations
o AUX 1 = Remote Alarm.
o AUX 2 = Puer Pump.
o AUX 3 = Contact at temperature
o AUX 4 = Thermostatic contact.
•  PURGE - To start, from the menu, the function to purge air bubbles from the system
•  MAX POWER - To set the maximum power in case of call” by a probe/thermostat
•  WINTER/SUMMER: WINTER/SUMMER heating period adjustment. The 3-way valve is always set to DHW for SUMMER
•  INSTALLATION SET = Menu to quickly set the type of system from the panel. The settable items refer to the system number. There
are 6 possible choices:
o 1. HEATING
o 2. HEATING WITH DHW (DOMESTIC HOT WATER)
o 3. STORAGE TANK WITH THERMOSTAT WITH TERMINAL BLOCK POSITION 5-6
o 4. STORAGE TANK WITH NTC PROBE WITH TERMINAL BLOCK POSITION 5-6
o 5. PUFFER WITH THERMOSTAT WITH TERMINAL BLOCK POSITION 1-2
o 6. PUFFER WITH NTC PROBE WITH TERMINAL BLOCK POSITION 1-2
•  ΔT START&STOP= POSITIVE and NEGATIVE hysteresis setting for START&STOP operation
•  CLEAN GRATE control to open and close the self-cleaning brazier (only MATIC products)
•  ADAPTIVE MODE = ON/OFF (default OFF)
•  TONE:
o SILENT: light BEEP only upon conrmation of commands
o NORMAL: BEEP only audible upon conrmation of commands (FACTORY SETTING)
o HIGH: BEEP audible every time the button is pressed
•  BRIGHTNESS = option to adjust the display contrast
•  DISPLAY SET = option to adjust the centring of the display
•  STANDBY DISPLAY = It is used to adjust the time after which the display goes into Stand by (see the previous paragraph). Adjustment
in seconds with a prolonged press of the keys in 5” steps (default is 120”). Limit is 600” (10 minutes). Pressing the key again after 600”
brings the standby to OFF, i.e. the standby screen never appears when ON
• 
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MCZ SUITE Hydromatic 18 M2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MCZ SUITE Hydromatic 18 M2 in the language / languages: English as an attachment in your email.

The manual is 9.65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of MCZ SUITE Hydromatic 18 M2

MCZ SUITE Hydromatic 18 M2 Installation Guide - English - 68 pages

MCZ SUITE Hydromatic 18 M2 User Manual - German - 68 pages

MCZ SUITE Hydromatic 18 M2 Installation Guide - German - 68 pages

MCZ SUITE Hydromatic 18 M2 User Manual - Dutch - 68 pages

MCZ SUITE Hydromatic 18 M2 Installation Guide - Dutch - 76 pages

MCZ SUITE Hydromatic 18 M2 User Manual - French - 68 pages

MCZ SUITE Hydromatic 18 M2 Installation Guide - French - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info