812458
51
Zoom out
Zoom in
Previous page
1/68
Next page
51
32-SAFETY DEVICES AND ALARMS
Technical Dept. - All rights reserved - Reproduction prohibited
ALARM ALERTS
If there is an operational anomaly, the stove enters the alarm phase displaying the problem that has taken place through a code, a brief
description of the alarm type and an acoustic warning.
The following table describes the possible alarms indicated by the stove, associated to the respective code that appears on the panel and
helpful tips to solve the problem.
MESSAGE ON DISPLAY TYPE OF PROBLEM SOLUTION
A01 The re does not ignite.
(without acoustic alarm)
Check the level of pellets in the hopper.
Check that the brazier is correctly positioned in its seat
and has no deposits or unburnt material.
Make sure the glow plug warms up.
Thoroughly empty and clean the brazier before
restarting.
A02 The re goes out abnormally.
(without acoustic alarm)
Check the level of pellets in the hopper.
Check that the brazier rests correctly in its seat and has
no visible deposits of unburnt pellets.
A03 Pellet hopper temperature too high
The structure is too hot because the product has been
used for too long at the maximum power or there is
poor ventilation. When the stove is suciently cold,
clear the alarm on the stove panel or via app. Once
the alarm is cancelled, the product can be switched on
normally.
A04 The temperature of the exhaust smoke has
exceeded certain preset safety limits.
The stove switches o automatically. Let the stove cool
down for a few minutes and then switch it on again.
Check the smoke expulsion and verify the type of pellet
used according to the instructions found in Chap. 2 of
this manual. If the alarm persists, contact the service
centre.
A05
Flue clogged - wind. Check the smoke duct.
The smoke extractor fails to guarantee sucient
primary air, required for correct combustion.
Draught diculties or clogged brazier.
Check whether the brazier is clogged and clean it, if
necessary.
Check, and if necessary clean, the smoke duct and the
air inlet.
Door open Check correct closing
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MCZ STAR HYDRO MATIC 12 M2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MCZ STAR HYDRO MATIC 12 M2 in the language / languages: English as an attachment in your email.

The manual is 8.98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of MCZ STAR HYDRO MATIC 12 M2

MCZ STAR HYDRO MATIC 12 M2 Installation Guide - English - 60 pages

MCZ STAR HYDRO MATIC 12 M2 Installation Guide - German - 60 pages

MCZ STAR HYDRO MATIC 12 M2 User Manual - German - 68 pages

MCZ STAR HYDRO MATIC 12 M2 Installation Guide - Dutch - 60 pages

MCZ STAR HYDRO MATIC 12 M2 User Manual - Dutch - 68 pages

MCZ STAR HYDRO MATIC 12 M2 Installation Guide - French - 60 pages

MCZ STAR HYDRO MATIC 12 M2 User Manual - French - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info