PELLET STOVES Chapter 3
INSTALLATION AND USE MANUAL
page 27
Installation and assembly Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited
B
C
C
With the screw D close the sheet metal E that keeps profile A
locked
Before refitting the grill B with the two screws C, also insert
the side tiles (See par.3.4.2)
F
3.4.2. Installation of side tiles
Remove the micro-perforated grill B and insert the three side tiles,
making them slide from the top towards the bottom on the runners of
the profiles A. On the upper and lower part of the tile it is advisable to
place small felt pads. Level the bubbles of the tiles. At this point it is
possible the retighten the micro-perforated grill B to the structure and
position the ceramic top. (fig.9)
3.4.3. Installation of ceramic top
Install the top by setting it on the four upper protuberances of the
stove. The part underneath is provided with four small cavities at the
rubber supports indicated in the figure 10
.
Figura 10 - Supports for installation of ceramic top
Figure 8 – Installation of lower front panel
Fi