812442
12
Zoom out
Zoom in
Previous page
1/32
Next page
12
13-MENU ENTRIES AND OPERATION
h - Pellet Recipe
This function is for adapting the stove to the type of pellet in use. As there are many types of pellets available on the market, operation
of the stove can vary considerably according to the quality of the fuel. When the pellets clog up the brazier due to excess loading of fuel
or when the ame is always high even at low power, or when the ame is low, it is possible to decrease/increase the amount of pellets
in the brazier:
The available values are:
-3 = A decrease of 20% with respect to the factory setting.
-2 = A decrease of 13% with respect to the factory setting.
-1 = A decrease of 6% with respect to the factory setting.
0% No changes.
3 = An increase of 10% with respect to the factory setting.
2 = An increase of 6% with respect to the factory setting.
1 = An increase of 3% with respect to the factory setting.
Proceed as follows to edit the recipe:
• Press the “menu key.
• Use the arrow keys to scroll through and select “Settings”
• Press “menu to conrm.
• Scroll with the arrows and select “Pellet recipe’’.
• Press “menu to conrm.
• Edit the % by using the + - keys.
• Press ‘’menu’ to conrm and ‘’esc to exit
i - Smoke rpm % variation
In the event the installation presents problems in extracting smoke (lack of draught or even pressure in the duct), it is possible to increase
the smoke and ash extraction speed. This change resolves all potential problems related to pellets clogged in the brazier and deposits
forming at the bottom of the brazier itself caused by poor quality fuel or fuel that produces a lot of ash. The values available range from
-30% to +50%, with increments of 10 percent at a time. Negative variation may be required if the ame is too low.
To edit this parameter, proceed as follows:
• Press the “menu key.
• Use the arrow keys to scroll through and select “Settings”
• Press “menu to conrm.
• Scroll with the arrows and select “Fume rpm Var..
• Press “menu to conrm.
• Edit the % by using the + - keys.
• Press ‘’menu’ to conrm and ‘’esc to exit
j - Components test
This can only be done when the stove is o and allows you to select the components to be tested:
• Glow plug: it is turned on for a xed period of 1 minute during which the panel displays the countdown in seconds.
• Feed screw: it is powered for a xed period of 1 minute during which the panel displays the countdown in seconds.
• Extractor: it is activated at 2500 rpm for a xed period of 1 minute during which the panel displays the countdown in seconds.
• Heat exchanger: enables you to conduct the test in V5 for a xed period of 1 minute during which the panel displays the countdown
in seconds.
Proceed as follows to enable the “Components test” function (only with stove o):
• Press the “menu key.
• Use the arrow keys to scroll through and select “Settings”
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MCZ GHEA AIR 6 XUP S1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MCZ GHEA AIR 6 XUP S1 in the language / languages: English as an attachment in your email.

The manual is 3.02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of MCZ GHEA AIR 6 XUP S1

MCZ GHEA AIR 6 XUP S1 Installation Guide - English - 52 pages

MCZ GHEA AIR 6 XUP S1 User Manual - German - 32 pages

MCZ GHEA AIR 6 XUP S1 Installation Guide - German - 52 pages

MCZ GHEA AIR 6 XUP S1 User Manual - Dutch - 32 pages

MCZ GHEA AIR 6 XUP S1 Installation Guide - Dutch - 52 pages

MCZ GHEA AIR 6 XUP S1 User Manual - French - 32 pages

MCZ GHEA AIR 6 XUP S1 Installation Guide - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info