694277

MCZ GEA Manual

29
Zoom out
Zoom in
Previous page
1/50
Next page
PELLET STOVES Chapter 4
INSTALLATION AND USE MANUAL
page 29
Operation Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited
4.8.2. Manual mode
In this mode you can only vary the thermal power provided by choosing
the flame power.
Button 4 of the remote control is used to select MANUAL mode. On
the display this is indicated by the message MAN and the flame
symbol. In this mode, button 5 is used to adjust the 5 heating powers
of the stove.
Press the upper part of button 5 to increase power. Press the lower
part to decrease power. This variation is indicated by the bars located
above the flame symbol. Upon reaching the 5th power level, the
message MAX appears under the flame symbol. This indicates that
maximum performance of the stove has been reached.
In this operating mode, the flame symbol is completely on.
4.8.2.1.
Changing from manual to automatic mode
To change from MANUAL to AUTOMATIC operating mode, just press
the button no. 4 . The message MAN will go off and the message
AUTO will come on. The flame power indicators and the flame icon will
disappear. The numerals will come on for setting the desired
temperature (icon 8)
4.8.3. Automatic mode
Whereas MANUAL mode lets you simply choose the thermal power
provided with no variation of operation over time, AUTOMATIC mode
lets you set a temperature to be reached in the room. In this operating
mode the stove will automatically vary the thermal power provided so
as to keep the temperature in the room constantly at the set value.
Press button 4 on the remote control to select AUTOMATIC mode.
This will be shown on the display by the message AUTO. In this mode,
by pressing button 5, only the desired room temperature is adjusted.
Press the upper part of button 5 to increase the selected temperature.
Press the lower part to decrease the temperature. The desired
temperature is indicated by the figures in icon no. 8
The remote control regulates the operation of the stove by constantly
comparing the room temperature (indicated at upper right on the
display and specifically the larger figures with the cassette symbol near
them) with the temperature set by the user.
Upon reaching the desired temperature in the room, the stove will
gradually go to minimum power. If instead the room temperature drops
below the set limit, the stove will gradually come back up to maximum
hearing performance.
Room temperature is measured by the remote control via a sensor
inside of it. Therefore, the stove will always attempt to reach the
temperature based on the measurements of the remote control sensor.
Thanks to this characteristic, the remote control can be
considered a mobile external thermostat, with a range of about
5 m (with batteries charged)
4
5
4
5
MAX
Downloaded from www.Manualslib.com manuals search engine
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MCZ GEA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MCZ GEA in the language / languages: English as an attachment in your email.

The manual is 3,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of MCZ GEA

MCZ GEA Usermanual and installation guide - Dutch - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info