PELLET STOVES Chapter 3
INSTALLATION AND USE MANUAL
page 17
Installation and assembly Technical service - Rights reserved MCZ GROUP S.p.A. - Reproduction prohibited
3.1.3. Technical characteristics
Technical characteristics Kaika – Face
Overall thermal power Max. 6,0 kw / 5160 kcal/h
Overall thermal power Min. 2.4 kw / 1720 kcal/h
Yield at maximum 92,8 %
Yield at minimum 94,0 %
Temperature of exhaust smoke at maximum 160°C
Temperature of exhaust smoke at minimum 100°C
Dust 14 mg/Nm3 (13% O2)
7 mg/MJ
CO at 13%O
²
at minimum and maximum 0.059 — 0.013%
CO
2
at minimum and maximum 4.1% – 8.0%
Mass of smoke at minimum and maximum 4 – 6 g/sec
Suggested draught at max power 0.10 mbar – 10 Pa
Suggested draught at min power 0.05 mbar – 5 Pa
Hopper capacity 20 litres
Fuel pellet type Pellet diameter 6-8 mm. Length range 5-30 mm
Pellet consumption per hour Min ~ 0.5 kg/h * Max. ~ 1.45 kg/h *
Operating time between re-fuelling At min~ 20 h * At max. ~ 7 h *
Heatable volume m
3
129/40 – 147/35 – 172/30 **
Combustion air inlet External diameter 50 mm.
Smoke outlet External diameter 80 mm.
Maximum absorbed electrical power Max. 320 W – Med. 80 W
Power supply frequency and voltage 230 Volts / 50 Hz
Net weight 120 kg
Weight with packaging 130 Kg
* Data that may vary depending on the type of pellets used.
**Heatable volume based on demand of cal/m
3
40-35-30 (respectively 40-35-30 Kcal/h for m
3
)
Appliance suitable for installation in a shared flue.
