812457
52
Zoom out
Zoom in
Previous page
1/68
Next page
52
32-SAFETY DEVICES AND ALARMS
MESSAGE ON DISPLAY TYPE OF PROBLEM SOLUTION
A07
Water probe tripped.
The water temperature exceeds the maximum
limit.
Limited heat exchange.
Possible causes:
closed system valves
system undersized for the product
air in the system
N.B.: the brazier opens to prevent further temperature
rise.
A08 Abnormal operation of smoke fan
Check cleanliness of the smoke fan compartment
and check if dirt is blocking it. If this is not enough,
the smoke fan is faulty. Contact an authorised service
centre to have it replaced.
A09
The smoke probe is faulty and does not detect
the exhaust smoke temperature properly
Contact an authorised service centre to have the
component replaced.
A11 Feed screw gear motor fault.
The component is not working regularly.
Contact an authorised service centre to have the
component checked and, if needed, replace the
component.
A12 Faulty gear motor driving sensor (PWM) Contact an authorised service centre.
A13 Circuit board overheating
The structure is too hot because the product has been
used for too long at the maximum power or there is
poor ventilation. When the stove is suciently cold,
clear the alarm on the stove panel or via app. Once
the alarm is cancelled, the product can be switched on
normally.
A14 Active sensor anomaly
Active Plus sensor operation anomaly.
This alarm blocks the stove and can be reset from the
App.
If the sensor is faulty, the alarm appears once again.
Contact an authorised service centre to have the
component replaced.
A17
Blocked feed screw due to clogged pellets or a
foreign body
The feed screw is not unblocked even after the feed
screw unblocking procedure indicated by the software
has been carried out (rotating the gear motor in both
directions). Try to remove the pellets and/or foreign
body with an extractor or call an authorised service
centre to perform this operation.
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MCZ EGO HYDRO MATIC 12 M2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MCZ EGO HYDRO MATIC 12 M2 in the language / languages: English as an attachment in your email.

The manual is 8.98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of MCZ EGO HYDRO MATIC 12 M2

MCZ EGO HYDRO MATIC 12 M2 Installation Guide - English - 60 pages

MCZ EGO HYDRO MATIC 12 M2 User Manual - German - 68 pages

MCZ EGO HYDRO MATIC 12 M2 Installation Guide - German - 60 pages

MCZ EGO HYDRO MATIC 12 M2 User Manual - Dutch - 68 pages

MCZ EGO HYDRO MATIC 12 M2 Installation Guide - Dutch - 60 pages

MCZ EGO HYDRO MATIC 12 M2 User Manual - French - 68 pages

MCZ EGO HYDRO MATIC 12 M2 Installation Guide - French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info