812445
23
Zoom out
Zoom in
Previous page
1/72
Next page
23
31-START&STOP
Technical Dept. - All rights reserved - Reproduction prohibited
INTERVENTION DELAY AND ADJUSTMENTS OF THE START&STOP TEMPERATURE HYSTERESIS
When the room temperature is reached, there is a waiting time for intervention to prevent the equipment from suddenly turning on/o as
the room temperature drops/rises, for example, when a door or an external window is opened. This waiting time therefore allows you to
be sure that the room temperature has actually dropped for a certain time inside the room (for example 5 minutes).
There also is a temperature threshold beyond which the equipment reacts to in the event of switching on and o and this is called
hysteresis. NEGATIVE hysteresis identies the temperature delta, beyond which the equipment must turn on again; whereas POSITIVE
hysteresis identies the temperature delta beyond which the equipment must turn o.
Example1: With the product switched on, POSITIVE hysteresis is 2°C. The room temperature is 21°C and the set temperature is 22°C. The
product will remain on until the room temperature is exceeded by 2°C and therefore, when T>23.0°C
Example2: With the product o, NEGATIVE hysteresis is 2°C. The room temperature is 19°C and the set temperature is 20°C. The product will
remain o until the set temperature drops 2°C and therefore, when T<18.0°C
FORCED RESTART FROM START&STOP WITH BUTTON OR TEMPERATURE
As previously mentioned, when a shutdown occurs via START&STOP, the display indicates the o condition with the icon, the key
remains green and the word STAND BY is displayed.
The button remains steady green and the keys also remain lit.
In this display condition, the product can be turned back on as follows:
1. Wait for the room temperature to drop below the intended temperature so that the
restart occurs via START&STOP
2. Deactivate the START&STOP with the relative button and proceed with a new start-
up.
3. Change the intended temperature by pressing the keys.
In this case, the temperature modication screen
appears. The equipment will turn on when the
setting is higher than the room temperature + the
POSITIVE hysteresis.
On the other hand, it remains in STAND BY if the
setting is lower than the room temperature +
POSITIVE hysteresis and it is not possible to switch
on the device, even with the text .
GREEN ICON
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MCZ EGO AIR 8 M3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MCZ EGO AIR 8 M3 in the language / languages: English as an attachment in your email.

The manual is 10.82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of MCZ EGO AIR 8 M3

MCZ EGO AIR 8 M3 Installation Guide - English - 56 pages

MCZ EGO AIR 8 M3 User Manual - German - 72 pages

MCZ EGO AIR 8 M3 Installation Guide - German - 56 pages

MCZ EGO AIR 8 M3 User Manual - Dutch - 72 pages

MCZ EGO AIR 8 M3 Installation Guide - Dutch - 56 pages

MCZ EGO AIR 8 M3 User Manual - French - 72 pages

MCZ EGO AIR 8 M3 Installation Guide - French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info