643531
46
Zoom out
Zoom in
Previous page
1/68
Next page
44
9-OPERATION
Special features of AUTO-ECO mode
Once you have activated ECO-STOP and selected the temperature setpoint, if the latter is lower than the room temperature the appliance
will immediately start counting down the “ECO stop T” time.
If the setpoint is higher than the room temperature, the appliance will continue running at maximum power until it reaches the
temperature setting.
Tones (panel display: ON-OFF)
This setting disables tones sounding when the keys are pressed. It has no eect on alarm signals.
Pellet recipe - modifying the load
This function is for adapting the stove to the type of pellet in use. As there are many types of pellet available on the market, operation of
the stove can vary considerably according to the quality of the fuel. If the pellets tend to jam in the brazier due to an excess of fuel. When
the pellets clog up the brazier due to excess loading of fuel or when the ames are high even at low power, or when the ames are low, it
is possible to decrease/increase the amount of pellets in the brazier:
Press the top right button “D” to open the menu.
Scroll through the menus with the bottom buttons “F” and “C” until you reach the SETTINGS menu.
Press button “D” next to the text SET.
Scroll through the menus with the bottom buttons “F” and “C” until you reach the PELLET RECIPE menu.
Conrm with the button “D” next to the text SET.
Modify the value with the bottom buttons “F” and “C” which correspond to the symbols + and -.
Conrm with the button “D” corresponding to OK.
Available values:
- 3 = Reduction of pellet loading by 20% at all power values
- 2 = Reduction of pellet loading by 13% at all power values
- 1 = Reduction of pellet loading by 6% at all power values
0 = no change
3 = Increase of pellet loading by 10% at all power values
2 = Increase of pellet loading by 6% at all power values
1 = Increase of pellet loading by 3% at all power values
Fumes evacuator fan speed variation - Var.% rpm fumes
In the event the installation presents problems in extracting smoke (lack of draft or even pressure in the duct), it is possible to increase
the smoke and ash extraction speed.
This change resolves all the potential problems related to pellets clogging in the brazier and deposits forming at the bottom of the brazier
itself caused by poor quality fuel or fuel that produces a lot of ash.
Press the top right button “D” to access the menu.
Scroll through the menus with the bottom buttons “F” and “C” until you reach the SETTINGS menu.
Press button “D” next to the text SET.
Scroll through the menus with the bottom buttons “F” and “C” until you reach the VAR. RPM FUMES menu.
Conrm with the button “D” next to SET.
Modify the value with the bottom buttons “F” and “C” corresponding to + and -.
Conrm with the button “D” corresponding to OK.
The extraction speed may be altered between -30% and + 50%, with increments of 10 percent at a time.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MCZ AMY Air at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MCZ AMY Air in the language / languages: English as an attachment in your email.

The manual is 5,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of MCZ AMY Air

MCZ AMY Air Usermanual and installation guide - Dutch - 64 pages

MCZ AMY Air Usermanual and installation guide - French - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info