694189
45
Zoom out
Zoom in
Previous page
1/64
Next page
45
28-ALARMS
Technical Dept. - All rights reserved - Reproduction prohibited
A13
Electronic control unit overheating The structure is too hot because the product has been
used for too long at the maximum power or there is
poor ventilation. When the stove is suciently cold,
press button B on the control panel or OFF on the remote
control to cancel alarm A13. Once the alarm is cancelled,
the product can be switched on normally.
A14
Faulty air ow rate sensor This alarm blocks the stove and can be reset from the
App. If the sensor is faulty, the alarm appears once
again. Contact an authorised service centre to have the
component replaced.
A17
Blocked feed screw due to clogged pellets
or a foreign body
The feed screw is not unblocked even after the feed screw
unblocking procedure indicated by the software has been
carried out (rotating the gear motor in both directions).
Try to remove the pellet and/or foreign body with an
extractor or call an authorised service centre to perform
this operation.
A21
SAFETY DEVICES
TRIP
Open stove door Close the door
Open fuel loading hatch Close the hatch.
Lower the fuel level in the hopper.
Air pressure switch Draught diculties or brazier clogged.
Check whether the brazier is clogged by deposits and
clean it, if necessary.
Check and if necessary clean the smoke duct and air inlet.
A22
Room probe anomaly Contact an authorised service centre to have the
component replaced.
POPUP
Disconnected Wi-Fi probe Make sure the device has charged batteries
Replace the batteries and restart the device’s connection
procedure
POPUP
Alarms From the App, it is possible to receive a message
regarding the alarms that cannot be reset from the App,
such as A01, A02, A03, A05, A21, but which can only be
reset from the stove’s panel. After resetting the alarm
from the panel, reset the message from the App.
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MCZ ALYSSA AIR 6 M1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MCZ ALYSSA AIR 6 M1 in the language / languages: English as an attachment in your email.

The manual is 10,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of MCZ ALYSSA AIR 6 M1

MCZ ALYSSA AIR 6 M1 Usermanual and installation guide - English - 52 pages

MCZ ALYSSA AIR 6 M1 Additional guide - German - 64 pages

MCZ ALYSSA AIR 6 M1 Usermanual and installation guide - German - 52 pages

MCZ ALYSSA AIR 6 M1 Additional guide - Dutch - 64 pages

MCZ ALYSSA AIR 6 M1 Usermanual and installation guide - Dutch - 52 pages

MCZ ALYSSA AIR 6 M1 Additional guide - French - 64 pages

MCZ ALYSSA AIR 6 M1 Usermanual and installation guide - French - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info