782333
26
Zoom out
Zoom in
Previous page
1/31
Next page
26
Customer Helpline 0345 605 2063
Maintenance
WARNING!
Always switch the product off, disconnect it from the power supply and let the product cool
down before performing inspection, maintenance and cleaning work!
• Keep the underbody and cutting blade clean and free of debris. Remove clippings from
the discharge chute.
• Check all nuts and bolts periodically for tightness before operation. After prolonged use,
especially in sandy soil conditions, the cutting blade will become worn and lose some of
its original shape. The cutting efciency will be reduced and the cutting blade should be
replaced.
• Lubricate the cutting blade after each use to prolong the life span of the cutting blade and
product. Apply light machine oil along the edge of the cutting blade.
This product does not contain any parts that can be repaired by the consumer. Contact an
authorised service centre or a similarly qualied person to have it checked and repaired.
We recommend that you mow in overlapping lines. Only mow with a sharp blade so that
the blades of grass do not fray. This can cause grass to turn yellow. To achieve a good cut,
guide the hover in lines that are as straight as possible. These lines should always overlap
by a few centimeters so that you do not leave any uncut strips.
How often you need to mow your lawn depends on how fast the grass is growing. During
the main growth period mow more frequently. If the grass is longer than usual, cut it in 2
or more stages. This will cause less stress to both the hover and the grass. Never cut the
grass by more than half its height.
Keep the under side of the hover casing clean and remove all grass deposits from it.
Regularly check to ensure there are no deposits blocking airow or stopping rotation of
the front wheel. Deposits make it more difcult to start the hover and also adversely affect
the mowing quality and the grass collection. Switch off the motor before you carry out any
inspections of the blade. Remember that the blade will continue to turn for a few seconds
after the motor has been switched off. Never attempt to stop the blade.
Check regularly that the blade is correctly secured, in good condition and sharp. If not,
sharpen or replace the blade.
If the moving blade strikes an object, stop the hover and wait until the blade has come to a
complete standstill. Then check the condition of the blade and the blade mounting. If they
are damaged, they must be replaced.
Place the mains lead in loops on the ground near the wall socket. Mow away from the
socket and cable and ensure that the mains lead is always on the section of lawn that you
have already mowed so that you do not run over the mains lead with the hover.
Maintenance
Repair
Mowing advice
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for McGregor MEH1430A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of McGregor MEH1430A in the language / languages: English as an attachment in your email.

The manual is 4.29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info