684102

McCulloch ROB S400 Manual

24
Zoom out
Zoom in
Previous page
1/52
Next page
Note: This is a useful function if the charging
station is placed below a veranda or in another
limited space area. Choosing a good starting
point is important so that the guide calibration
process is optimized.
1. Do steps 1-3 in
To get access to the menu
on page 20
.
2. Use the arrow button and the OK button to
move through the menu structure
Settings >
Installation > Starting point
.
3. Use the arrow buttons to specify the
distance in cm.
4. Push the BACK button.
3.10.7 To set the Drive Past Wire
function
The front of the product always moves past the
boundary wire by a specified distance before the
product moves back into the work area. The
factory setting is 30 cm. You can select a
distance of 20-40 cm.
1. Do steps 1–3 in
To get access to the menu
on page 20
.
2. Use the arrow button and the OK button to
move through the menu structure
Settings >
Installation > Drive Past Wire
.
3. Use the arrow buttons to set the distance in
cm.
4. Push the BACK button.
3.10.8 ECO mode
ECO mode
stops the signal in the boundary loop,
the guide wire and the charging station, when the
product is parked or is charging.
Note: Use
ECO mode
if the signal from the
charging station causes interference with other
wireless equipment, for example hearing loops or
garage doors.
Note: Push the STOP button before you remove
the product from the charging station. If not, the
product can not be started in the work area.
3.10.8.1 To set the ECO mode
1.
Do steps 1–3 in
To get access to the menu
on page 20
.
2. Use the arrow buttons and the OK button to
move through the menu structure
Settings >
Installation > ECO mode
.
3. Push the OK button to select the
ECO
mode
.
4. Push the BACK button.
3.10.9 To avoid collisions with the
mower house
The wear on the product and the mower house
decreases when you select
Avoid house
collisions
.
1. Do steps 1–3 in
To get access to the menu
on page 20
.
2. Use the arrow buttons and the OK button to
move through the menu structure
Settings >
Installation > Mower house > Avoid house
collisions
.
3. Push the BACK button.
Note: If
Avoid house collisions
is selected it can
result in grass that is not cut around the charging
station.
3.10.10 Bluetooth
®
The product can connect to mobile devices that
have the McCULLOCH
app installed.
McCULLOCH is a free app for your mobile
device. The short-range interaction with the
product is called Bluetooth
®
. When pairing
between the product and app has been
confirmed, you have access to the menus and
functions as long as you are within short-range
(Bluetooth
®
).
3.10.10.1 To install the McCULLOCH app
1. Download the McCULLOCH app on your
mobile device.
2. Register in the McCULLOCH app.
3. Log in to your McCulloch account in the
McCULLOCH app.
3.10.10.2 To pair the McCULLOCH app and
the product
1. Do steps 1–3 in
To get access to the menu
on page 20
.
2. Use the arrow buttons and the OK button
to move through the menu structure
Settings
> Installation > Bluetooth > New pairing
.
24 - Installation 985 - 004 - 22.01.2019
… 24 …


Need help? Post your question in this forum.

Forumrules
1

Forum

mcculloch-rob-s400

Reset search

  • Rob S 400 not connecting to App on iPhone 11 after update of app recently. It connects fine with Samsung Phone App. Submitted on 4-7-2023 at 18:21

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for McCulloch ROB S400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of McCulloch ROB S400 in the language / languages: English as an attachment in your email.

The manual is 4,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of McCulloch ROB S400

McCulloch ROB S400 Quick start guide - English, German, French, Italian - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info