684106
34
Zoom out
Zoom in
Previous page
1/52
Next page
4.4 Stop
1. Press the STOP button.
The robotic lawnmower stops, the blade motor stops
and the hatch opens.
4.5 Switch off
1. Press the STOP button.
2. Set the main switch to position
0
.
Always switch the robotic lawnmower off using the main
switch if it requires maintenance or if the robotic
lawnmower must be moved outside the working area.
4.6 Timer and Standby
Use the timer function (see
Timer on page 21
) to avoid
a downtrodden lawn.
4.6.1 Standby
The robotic lawnmower has an inbuilt standby period
according to the Standby time table. The standby period
provides for instance a good opportunity to water or play
games on the lawn.
Model
Standby time, minimum
hours per day
McCULLOCH ROB R600 11
McCULLOCH ROB R800 8
McCULLOCH ROB R1000 4
4.6.2 Setting the timer
When setting the timer, calculate that the robotic
lawnmower mows about the amount of the number of
square meters per hour and day listed in table Work
capacity.
Model
Approximate work capaci-
ty, m
2
per hour and day
McCULLOCH ROB R600 43
McCULLOCH ROB R800 50
McCULLOCH ROB R1000 48
If the working area is for example 360 m
2
in size, ROB
R1000 must operate for 7,5 hours a day. The times are
approximate and depend for instance on grass quality,
blade sharpness and battery age.
WARNING: Use the timer to avoid mowing
when there are usually children, pets and
anything else that could be damaged by the
rotating blades on the lawn.
The factory setting for the timer is 07:00-23:00 and it
allows mowing every day of the week. This setting is
suitable for the listed maximum working area.
If the size of the working area allows it, the quality of the
grass can be further improved if it is cut every other day
instead of a few hours every day. In addition, the grass
benefits from resting completely during at least a three-
day period once a month.
4.6.3 Example 1
The times used in this example are applicable to ROB
R600, but the principle is the same for other models.
Timer setting,
Period 1
: 07:00 - 23:00
Active period (A): 07:00-20:00
The factory setting ensures that the robotic lawnmower
begins cutting the lawn at 07:00. However the mower is
parked in standby mode in the charging station from
20:00 and rests until it starts cutting again at 07:00.
If the timer setting is divided into 2 work periods, the
standby period can be divided into a number of periods.
The minimum standby period time must however be
according to the Standby time table.
24 h
A
B
Standby
Mowing
Charging
Opera
tion
ROB R600
Operation, A = max. hours 13
Charging/Standby, B = min. hours 11
4.6.4 Example 2
The times used in this example are applicable to ROB
R600, but the principle is the same for the other models.
Timer setting
Period 1
(A): 06:00 - 17:00
Timer setting
Period 2
(C): 20:00 - 23:00
Active period (A): 06:00 - 17:00
34 - Operation 358 - 001 - 21.09.2017
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for McCulloch ROB R800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of McCulloch ROB R800 in the language / languages: English as an attachment in your email.

The manual is 5,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of McCulloch ROB R800

McCulloch ROB R800 Quick start guide - English - 8 pages

McCulloch ROB R800 User Manual - German - 56 pages

McCulloch ROB R800 Quick start guide - German - 8 pages

McCulloch ROB R800 User Manual - Dutch - 56 pages

McCulloch ROB R800 Quick start guide - French, Italian - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info