684106
14
Zoom out
Zoom in
Previous page
1/52
Next page
3.5.1 Plan where to lay the boundary wire
The boundary wire must be laid so that:
The wire forms a loop around the working area. Use
original boundary wire. It is specially designed to
resist dampness from the soil.
The robotic lawnmower is never more than 15 m
from the wire at any point in the working area.
The wire is no more than 400 m long.
About 20 cm of extra wire is available to which the
guide wire will be connected later. See
Laying the
boundary wire on page 16
.
The illustration below shows how the boundary wire
must be laid around the working area and around
obstacles. Use the supplied measurement gauge to
obtain the correct distance. See
Product overview on
page 5
.
5 cm / 2"
0 cm
30 cm / 12"
20 cm / 8"
3.5.2 Working area boundaries
Depending on what the working area is adjacent to, the
boundary wire must be laid at different distances from
obstacles.
If a high obstacle (5 cm or more), for example a wall or
fence, borders the working area, the boundary wire
should be laid 30 cm from the obstacle. This will prevent
the robotic lawnmower from colliding with the obstacle
and reduce body wear. About 20 cm of the lawn around
the fixed obstacle will not be mown.
30 cm / 12"
> 5 cm / 2"
If the working area borders a small ditch, a flower bed or
a small elevation, for example a low kerbstone (1-5 cm),
the boundary wire should be laid 20 cm inside the
working area. This prevents the wheels from driving into
the ditch or up onto the kerbstone which might be lead
to excessive wear on the robotic lawnmower. About 12
cm of the lawn along the ditch/kerbstone will not be
mown.
20 cm / 8"
1-5 cm / 0.4-2"
If the working area borders on a paving stone path or
similar that is level with the lawn (+/- 1 cm), it is possible
to allow the robotic lawnmower to run a little over the
path. The boundary wire should then be laid 5 cm from
the edge of the path. All the grass along the side of the
paving stone path will be cut.
5 cm / 2"
max 1 cm / 0.4"
When the working area is divided by a paving stone path
that is level with the lawn, it is possible to allow the
robotic lawnmower to run over the path. It can be an
advantage to lay the boundary wire under the paving
stones. The boundary wire can also be laid in the joint
between the paving stones. Ensure that the tiles are in
level with the lawn to avoid excessive wear on the
robotic lawnmower.
14 - Installation 358 - 001 - 21.09.2017
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for McCulloch ROB R800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of McCulloch ROB R800 in the language / languages: English as an attachment in your email.

The manual is 5,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of McCulloch ROB R800

McCulloch ROB R800 Quick start guide - English - 8 pages

McCulloch ROB R800 User Manual - German - 56 pages

McCulloch ROB R800 Quick start guide - German - 8 pages

McCulloch ROB R800 User Manual - Dutch - 56 pages

McCulloch ROB R800 Quick start guide - French, Italian - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info