684105
4
Zoom out
Zoom in
Previous page
1/52
Next page
The blades must be in good condition to obtain the best
mowing result. In order to keep the blades sharp for as
long as possible it is important to keep the lawn free
from branches, small stones and other objects.
Replace the blades regularly for the best mowing result.
See
Replace the blades on page 36
.
1.2.3 Working method
The robotic lawnmower automatically mows the lawn. It
continuously alternates between mowing and charging.
When the robotic lawnmower body hits an obstacle or
approaches the boundary wire the robotic lawnmower
reverses and selects a new direction. Sensors at the
front and back will sense when the robotic lawnmower is
approaching the boundary wire. The front of the robotic
lawnmower always passes the boundary wire by a
specific distance before the mower turns around. The
distance can be changed to adapt to the installation if
required.
The STOP button on the top of the robotic lawnmower is
mainly used to stop the robotic lawnmower when it’s
running. When the STOP button is pressed a hatch
opens, behind which there is a control panel. The control
panel is where you manage all the robotic lawnmower
settings.The STOP button remains pressed in until the
hatch is closed again. This together with the START
button acts as a start inhibitor.
1.2.4 Movement pattern
The movement pattern of the robotic lawnmower is
random, which means that a movement pattern is never
repeated. With this cutting system the lawn is mown
evenly without any mowing lines from the robotic
lawnmower.
1.2.5 Search method
The guide wire is a wire that is laid from the charging
station towards, for instance, a remote part of the
working area or through a narrow passage. It is
connected to the boundary wire and makes it much
easier and faster for the robotic lawnmower to find the
charging station. For more information, see
Installation
of the guide wire on page 18
.
The robotic lawnmower starts to search for the charging
station when the battery charge becomes too low. The
robotic lawnmower does not mow when it is searching
for the charging station.
When the robotic lawnmower searches for the charging
station, it first searches irregularly for the guide wire.
Then it follows the guide wire to the charging station,
turns around just in front of the station and backs into it.
4 - Introduction 358 - 001 - 21.09.2017
4


Need help? Post your question in this forum.

Forumrules
1

Forum

mcculloch-rob-r600

Reset search

  • hi, i have a rob r600 since 4 years, 3500 hours of work, lately stop work right in the middle of the garden with blank display, no powered. After i dispose the rob in the charging home i have to insert as the first time language, time etc etc. Once is full charge starthis job but stop again the some day.
    Any suggestion? software? need new battery?
    thanks
    Alf Submitted on 3-11-2022 at 08:05

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for McCulloch ROB R600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of McCulloch ROB R600 in the language / languages: English as an attachment in your email.

The manual is 5,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of McCulloch ROB R600

McCulloch ROB R600 Quick start guide - English - 8 pages

McCulloch ROB R600 User Manual - German - 56 pages

McCulloch ROB R600 Quick start guide - German - 8 pages

McCulloch ROB R600 User Manual - Dutch - 56 pages

McCulloch ROB R600 Quick start guide - French, Italian - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info