Manual McCulloch MRT6 (page 49 of 60) (English, German, Dutch, French, Italian, Spanish)

684274

Zoom out

Zoom in

1/60

Ground drive belt replacement

Take to an authorized dealer for repair.

Tine replacement

A badly worn tine causes your tiller to work harder and dig

shallower. Most important, worn tines can not chop and

shred organic matter as effectively nor bury it as deeply as

good tines. A tine this worn (fig. 16) needs to be replaced.

To maintain the superb tilling performance fo this machine the

tines should be checked for sharpness, wear and bending,

particulary the tines which are next to the trans mis sion (fig.

17). If the gap between the tines exceeds 3-1/2", they should

be replaced or straightened as nec es sary.

New tines should be assembled as shown in (fig.18.) Sharp-

ened tine edges will rotate rearward from above (fig.18).

CAUTION!

Never tamper with the engine governor, which is factory set

for proper engine speed.

1. New tine

2. Worn tine

3. Sharp edge

4. Hairpin clip

5. Retaining pin

Figure 16

Figure 17

Tine

3-1/2" max.

Figure 18 Counter tine

rotation

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of McCulloch MRT6 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

McCulloch MRT6 Manual

Product: