Manual McCulloch Mac742 (page 6 of 17) (English, German, French, Spanish)

478387

Zoom out

Zoom in

1/17

Thumb on underside of

handlebar

Elbow locked

S Keep a good, firm grip on the saw with both

hands when the engine is running and don’t

let go. A firm grip will help you reduce kick-

back and maintain control of the saw . Keep

the fingers of your left hand encircling and

your left thumb under the front handlebar .

Keep your right hand completely around the

rear handle whether your are right handed or

left handed. Keep your left arm straight with

the elbow locked.

S Position your left hand on the front handle-

bar so it is in a straight line with your right

hand on the rear handle when making

bucking cuts. Never reverse right and left

hand positions for any type of cutting.

S Standwithyourweightevenly balanced on

both feet.

S Stand slightly to the left side of the saw to

keep your body from being in a direct line

with the cutting chain.

S Do not overreach. You could be drawn or

thrown off balance and lose control of the

saw.

S Do not cut above shoulderheight. It is dif fi-

cult to maintain control of saw above

shoulder height.I

KICKBACK SAFETY FEATURES

WARNING: The following features are

included on your saw to help reduce the hazard

of kickback; however , such features will not to-

tally eliminate this dangerous reaction. A s a

chain saw user , do not rely only on safety de-

vices. Y ou must follow all safety precautions,

instructions, and maintenance in this manual to

help avoid kickback and other forces which

can result in serious injury.

S Reduced--Kickback Guide Bar, designed

with a small radius tip which reduces the

size of the kickback danger zone on the

bar tip. A Reduced--Kickback Guide Bar has

been demonstrated to significantly reduce

the num ber and seri ousness of kickbacks.

Small Radius Tip

Reduced

ickback

Symmetrical

Guide Bar

Symmetrical Guide Bar

Large Radius Tip

S Low--Kickback Chain, designed with a

contoured depth gauge and guard link

which deflect kickback force and allow

wood to gradually ride into the cutter.

ow-

ickback Chain

Contoured Depth Gauge

Elongated Guard Link

Deflects Kickback

Force And Allows

Wood To Gradually

Ride Into Cutter

S Handguard, designed to reduce the chance

of your left hand contacting the chain if your

hand slips off the front handlebar.

S Position of front and rear handlebars, de-

signed with distance between handlesand

“in-line” with each other. The spread and

“in-line” position of the hands provided by

this design work together to give balance

and resistance in controlling the pivot of

the saw back toward the operator if kick-

back occurs.

WARNING: DO NOT RELY UPON

ANY OF THEDEVICES BUILT INTOYOUR

SAW. YOU SHOULD USE THE SAW

PROPERLY AND CAREFULLY TO AVOID

KICKBACK. Reduced--kickback guide bars

and low--kickback saw chains reduce the

chance and magnitude of kickback and are

recommended. Yoursaw has a lowkickback

chain and bar as original equipment.Repairs

on a chain b rake should be made by an au-

thorized servicing dealer. Take your unit to

the place of purchase if purchased from a

servicing dealer, or to the nearest authorized

master service dealer.

S Tipcontact in some cases may cause a light-

ning fast reverse REACTION, kicking the

guide bar up and back toward the operator .

S Pinching the saw chain along the top ofthe

guide bar may push the guide bar rapidly

back toward the operator.

S Either of these reactions may cause you to

lose control of the saw which could result

in serious injury. Do not rely exclusively

uponthe safety devices built into your saw.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of McCulloch Mac742 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 0,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

McCulloch Mac742 Manual

Product: