684219
21
Zoom out
Zoom in
Previous page
1/168
Next page
English – 21
Gear cases
To keep your drive system working properly, the gear
cases and area around the drive should be kept clean
and free of trash build-up. Clean under the drive cover
twice a season.
The gear cases are filled with lubricant to the proper
level at the factory. The only time the lubricant needs
attention is if service has been performed on the gear
case.
Under normal usage the grass catcher is subject to
deterioration and wear. Check the grass catcher
frequently for wear or deterioration. Replace the bag
only with grass bags that meet the manufacturer’s
recommendations and specifications.
Water washout feature
Your lawn mower is equipped with a fitting that allows
quick and easy cleaning of the underside of the housing.
Note that water, grass and other debris will drain from
beneath the mower housing during the washout process.
1 Move the machine to an area of cut grass or another
hard surface.
2 Remove grass catcher or mulch plug from the lawn
mower.
3 Close the back shield.
4 Connect a garden hose to the washout port fitting.
5 Turn on water supply and check for leaks at the fitting.
6 If no leaks are present, start engine and let engine run
until the underside of the lawn mower is clean.
CAUTION! Do not engage the drive system during the
washout process.
7 Turn off the engine.
8 Shut off water supply and remove hose from fitting.
IMPORTANT! Do not remove hose from fitting while
engine is running. Water in engine can result in
shortened engine life.
9 Start engine and let engine run for a full minute to
remove excess water from mower.
Engine
Lubrication
Use only high quality detergent oil rated with API service
classification SG-SL. Select the oil’s SAE viscosity grade
according to your expected operating temperature.
CAUTION! Although multi-viscosity oils (5W30, 10W30
etc.) improve starting in cold weather, these
multi-viscosity oils will result in increased oil
consumption when used above 32qF. Check your
engine oil level more frequently to avoid possible
engine damage from running low on oil.
Change the oil after every 25 hours of operation or at
least once a year.
Check the engine oil level before starting the engine
and after each 5 hours of continuous use. Tighten oil
plug securely each time you check the oil level.
Oil level
Before starting for the first time
Your lawnmower is shipped without oil in the engine. You
receive a container of oil with the unit. Slowly pour the
entire container down the oil fill spout into the engine.
IMPORTANT! Do not overfill!
Check the engine’s oil level
The lawn mower should stand on flat ground when you
check the oil level. Ensure the ignition lead has been
removed from the spark plug before you open the oil filler
cap.
1 Check the oil level with the dipstick on the oil filler cap.
2 Remove the oil cap and wipe the dipstick clean.
3 Put the dipstick back in. The oil filler cap must be
completely screwed down to give a correct picture of
the oil level.
4 If the oil level is low, fill using engine oil up to the upper
level on the dipstick.
CAUTION! Initial oil fill requires only 15 oz. due to
residual oil in engine from the manufacturers 100%
quality testing. When changing oil you may need 18 oz.
TEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE
SAE VISCOSITY GRADES
-20 0 30 40
80
100
-30
-20 0
20 30 40
F
C
32
-10
10
60
5W-30
SAE 30
MAINTENANCE
SAE VISCOSITY GRADES
TEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE
5W-30
SAE 30
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for McCulloch M53-150AP 4x4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of McCulloch M53-150AP 4x4 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 27,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info