684219
17
Zoom out
Zoom in
Previous page
1/168
Next page
English – 17
Starting and stopping
Before starting
!
WARNING! Please read the operator’s
manual carefully and make sure you
understand the instructions before
using the machine.
Wear personal protective equipment.
See instructions under the heading
”Personal protective equipment”.
Keep people and animals well away from the working
area.
Perform daily maintenance. See instructions in the
section “Maintenance”.
Ensure the ignition lead sits correctly on the spark
plug.
Add oil if necessary. See instructions under the
heading Maintenance.
Add gasoline. See instructions in the section "Fuel
handling".
Disengage drive system, if so equipped, before
starting the engine (motor).
Manual Start
The engine brake handle must be held against the
handlebar when the engine is started.
Position yourself behind the machine.
Grip the starter handle and pull quickly. Do not allow
the starter rope to snap back. Never wrap the starter
cord around your hand
Drive
Self-propelling is controlled by holding the brake
handle down to the handle and pulling one or both of
the drive levers upwards toward the handle. The
further toward the handle the drive levers are pulled,
the faster the unit will travel.
Forward motion will stop when either the the brake
handle or the drive levers are released.
To stop forward motion without stopping the engine,
release the drive lever only. Hold the the brake handle
down against handle to continue mowing without
self-propelling.
When the drive starts feeling slow you need to adjust the
drive control cable. Finely adjust the cable using the
adjuster screw.
Turn off the engine. Always disconnect the spark plug
before performing maintenance or accessing movable
parts.
To tension the wire and increase speed, turn the
adjustment screw counterclockwise.
Make sure the drive control cable is not tensioned too
tight. If the lawn mower starts to drive without the clutch
lever is being operated, extend the wire.
To extend the wire and reduce speed, screw the
adjustment screw clockwise.
OPERATING
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for McCulloch M53-150AP 4x4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of McCulloch M53-150AP 4x4 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 27,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info