478392
13
Zoom out
Zoom in
Previous page
1/17
Next page
13
S Make your fist cut 1/3 of the way through
the bottom of the limb.
S Next makea 2ndcut all the way through
the limb. Then cut a third overcut leaving
a1to2inchc ollarfromthetrunkofthetree.
First cut
Second cut
Third cut
Collar
Pruning technique
SERVICE AND ADJUSTMENTS
WARNING: Improper maintenance
could r esult in serious engi ne damage or in se-
rious injury.
WARNING: Disconnect the spark
plug before performing maintenance, except
for carburetor adjustments.
We recommend all service and adjustments
not listed in this manual be performed by an
Authorized Service Dealer.
MAINTENANCE SCHEDULE
Check:
Fuel mixture level Before each use....
Bar lubrication Before each use.......
Chain tension Before each use.......
Chain sharpness Before each use....
For damaged parts Before each use..
For l oose caps Before each use......
For loose fasteners Before each use...
Fo r loose parts Before each use......
Inspect and Clean:
Bar Before each use................
Complete s aw After each use.......
Air filter Every 5 hours*.............
Chain brake Every 5 hours*........
Spark arresting screen
and muffler Every 25 hours*.........
Replace spark plug Yearly.
Replace fuel filter Yearly...
*HoursofOperation
AIR FILTER
CAUTION: Do not clean filter in gaso-
line or other flammable solvent to avoid
creating a fire hazard or producing harmful
evaporative emissions.
Cleaning the air filter:
A dirty air filter decreases engine perform-
ance and increases fuel consumption and
harmful emissions. Always clean after every
5 hours of operation.
1. Clean the cover and the area around it to
keep dirt and sawdust from falling into
the carburetor chamber when the cover
is removed.
2. Remove the parts as illustrated below.
3. Wash the filter in soa p and water. Rinse
in clean cool water. Air dry completely
before reinstalling.
4. Reinstall par ts.
Air Filter
Cylinder Co
v
er
Screws
Cylinder
Cover
BAR MAINTENANCE
If your saw cuts to one side, has tobeforced
through the cut, or beenrunwithanimproper
amount of bar lubrication it may be neces-
sarytoservice yourbar. A wornbarw illdam-
age your chain and make cutting difficult.
After each use, ensure ON/STOP switch is
in the STOP position, thenclean all s awdust
from the guide bar and s procket hole.
To maintain guide bar :
S Move ON/STOP switch to the STOP posi-
tion.
S Loosen and remove chain brake nuts and
chain brake. Remove bar and chain from
saw.
S Clean the oil holes an d bar groove after each
5 hours of operation.
Remove Sawdust From
Guide Bar Groove
Oil Hole
S Burring of guide bar rails is a normal
process of rail wear. Remove t hese burrs
with a flat file.
S When railtopisuneven, use af latfiletor e-
store square edges and sides.
Correct GrooveWorn Groove
File Rail Edges
and Sides
Square
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for McCulloch M4218 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of McCulloch M4218 in the language / languages: English, German, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info