684189
10
Zoom out
Zoom in
Previous page
1/32
Next page
10 – English
SAFETY INSTRUCTIONS
Observe the risk of injury caused by moving or hot parts if
the engine is started with the engine cover open or
protective cowlings removed.
Do not change the setting of governors. If you run too fast,
y
ou risk damaging the machine components.
Never use the machine indoors or in spaces lacking
proper v
entilation. Exhaust fumes contain carbon
monoxide, an odourless, poisonous and highly dangerous
gas.
Stop and inspect the equipment if you run over or into
an
ything. If necessary, make repairs before starting.
Never make adjustments with the engine running.
The machine is tested and approved only with the
equipment or
iginally provided or recommended by the
manufacturer.
The blades are sharp and can cause cuts. Wrap the
b
lades or wear protective gloves when handling them.
Check regularly that the parking brake works. Adjust and
maintain as required.
Reduce the risk of fire by removing grass, leaves and
other debr
is that may have fastened on the machine.
Allow the machine to cool before putting it in storage.
Transport
The machine is heavy and can cause serious crush
injuries. Take extra care when loading it onto or off a
vehicle or trailer.
Use an approved trailer to transport the machine.
To secure the machine on the trailer, two approved
tension belts and f
our wedge shaped wheel blocks should
be used.
Engage the parking brake and tie the tension belts around
stab
le parts on the machine, e.g. frame or rear wagon.
Secure the machine by tensioning the belts towards the
back and the front of the trailer respectively.
Place the wheel blocks in front of and behind the rear
wheels
.
Check and observe local road traffic regulations before
tr
ansporting or driving the machine on roads.
IMPORTANT INFORMATION
The parking brake is not sufficient to lock the machine
during transport. Ensure you secure the machine firmly to
the transporting vehicle.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for McCulloch M125-97FH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of McCulloch M125-97FH in the language / languages: English as an attachment in your email.

The manual is 16,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info