684139
12
Zoom out
Zoom in
Previous page
1/320
Next page
Battery status indication during
operation
The display on the user control interface shows the
battery capacity and if there are problems with the
battery pack. The battery capacity is shown while the
machine is in operation.
LED lights Battery status
All Green
LEDs come on
Fully Charged (100% - 76%)
LED 1, 2 and 3
come on
The battery pack is 75% - 51% charg-
ed.
LED 1 and 2
come on
The battery pack is 50% - 26% charg-
ed.
LED lights Battery status
LED 1 comes
on
The battery pack is 25% - 6% charg-
ed.
LED 1 flashes The battery pack is 5% - 0% charged.
If there is an error with the battery pack during
operation, all four green LEDs of the battery state of
charge display flash. Remove the battery pack from the
machine and press the indicator button on the battery
pack to show the error code for the error. The LED's on
the battery pack illuminate and show an error code if an
error has occurred. Consult the battery manual for a list
of error codes and solutions to the errors.
MAINTENANCE
WARNING: Read and understand the safety
chapter before you clean, repair or do
maintenance on the product.
General recommendations for
maintenance
The warranty on this product does not include incorrect
or not careful operation of the product by the operator.
To receive full value from the warranty, the operator
must do maintenance on the product as written in the
instructions of this manual. Different adjustments must
be made at different intervals to keep your product in
correct work condition.
Examine the blade for wear each year.
To examine the tires
Keep the tires free of unwanted material and
chemicals to prevent damage to the rubber.
Keep the tires away from stumps, stones, ruts, sharp
objects and other objects which can cause damage
to the tires.
To do a general inspection
Check that nuts and screws are tight.
Make sure no cables are pinched.
Maintenance schedule
Use the maintenance schedule to see the necessary
maintenance requirements of your product, and when
the maintenance must occur. The intervals are
calculated on average use of the product and may be
different because of how frequently you use it.
Tighten bolts and nuts before each use and before
storage.
Clean and examine the grass catcher, if installed,
before and after each use, and before storage.
Examine the tires before each use.
Clean the product after each use and before storage.
Use a scraper to clean below the deck.
Examine the blade for damage and cracks in 25 hour
intervals. Replace blades more frequently if you cut
in sandy soil.
Lubricate the product in 25 hour intervals.
Clean and fully charge the battery pack after use and
after storage. Charge the battery pack for max. 24
hours before storage.
Do not keep the battery pack on the battery charger
during storage. Charge the battery pack for a
maximum of 24 hours.
Examine the drive belt and pulleys in 25 hour
intervals (if equipped).
To clean the product
Use a brush to remove unwanted material and grass
on the product.
Keep unwanted material off finished surfaces and
wheels.
Use a scraper below the product to remove the
buildup of grass and waste.
Do not use a high pressure washer to clean the
product.
Do not flush water directly on the electrical
powerhead or battery contacts.
When you clean below the product, remove the
battery pack and put the product on its side with the
user control interface pointing up.
CAUTION: Do not clean the product with
water, cleaning fluids or solvents. Remove
unwanted material external to the product
with a soft brush or dry cloth that does not
contain metal.
To clean the grass catcher
Pores in cloth grass catchers can become filled with
dirt and dust during operation. This causes the grass
catcher to collect less grass. To prevent this,
12
778 - 004 - 23.10.2018
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for McCulloch Li58-26 M46 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of McCulloch Li58-26 M46 in the language / languages: All languages as an attachment in your email.

The manual is 3,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info