Manual McCulloch EL1641 (page 6 of 15) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

478446

Zoom out

Zoom in

1/15

ENGLISH – 3

reference number of the corresponding component to

draw the reader’s attention to the main safety

procedure linked with that particular situation; the

machine parts shown in “A – GENERAL

DESCRIPTION” are indicated in italics in the text for

easy identification.

Precautions prior to machine use. Never permit

this machine to be used by any persons who are not

perfectly familiar with the manual instructions, who

are not in good physical and mental condition, who

are not sufficiently competent and by children (local

regulations may sometimes limit the age of operators

permitted to use the machine). Inexperienced

persons must follow a training period operating on a

saw horse only. The user is responsible for any

accidents that may cause injury to other persons and

damage to property, as well as any other type of

danger risk. The machine must never be used for

operations other than those specifically described in

this manual, and exclusively with the bars and chains

indicated. This machine must never be used when

users are tired, or not in good physical condition, or if

under the effect of any substance that may alter their

physical or mental condition (pharmaceuticals,

alcohol, drugs etc.) Make certain that the user knows

how to stop the motor and chain in case of necessity.

Take great care and pay close attention at all times

when using this machine, following all general

behaviour rules according to good sense.

1. Control checks. Control the machine with care

before use each time, especially if it has been subject

to strong impact, or if it shows any signs of

malfunction. Check that the machine has been

assembled correctly, that all components are in

correct condition and perfectly clean. Perform all

operations described in the chapter “Maintenance –

before each use”. Make sure that all spanners and

tools used for adjustment operations have been

removed, that all screws and nuts are in their correct

housing and tightened correctly, and that the bar and

the chain are mounted correctly. If even one single

condition described above is not satisfactory DO NOT

USE the machine.

2. Repairs and Maintenance. All the machine parts

that can be replaced personally, are clearly explained

in the “Assembly / disassembly” instructions chapter.

In the case of damaged or worn components, always

use exclusively original homologated accessories and

spare parts that are available from official distributors.

Where necessary, all other machine parts must be

replaced exclusively by an Authorised Service

Centre. All danger risks increase considerably if

maintenance operations are not performed regularly,

not performed by competent professional personnel,

or if non-original accessories /spare parts are

mounted on the machine. In any of the cases

described above, the manufacturer will not be held

responsible for any injury to persons or damage to

property. In the case of any doubt, please contact an

Authorised Service Centre.

3. Maintenance in complete safety. All

maintenance, assembly, disassembly and oil tank

filling operations must be performed with the machine

set in a stable position on a flat solid surface and with

the cable plug disconnected from the electricity

supply (unless this is explicitly specified otherwise).

The chain must be arrested and the user must wear

suitable protective gloves.

4. Clothing. When using this machine the user must

wear the following homologated individual protective

clothing : close-fitting protective clothing, safety boots

with non-slip soles, crush-proof toe puffs and cut-

proof protection; cut-proof vibration-proof gloves,

protective goggles or safety visor (remove protective

film where present); ear protection muffs; helmet (if

there is any danger of falling objects); some efficient

method to cover or tie hair back from shoulder length

(if hair is longer than shoulders); dust-proof mask. DO

NOT WEAR shorts, loose clothing, unbuttoned

clothing, or any jewellery that could become caught in

moving machine parts. Do not wear sandals and

never work bare-footed.

5. Health precautions – Vibrations and Noise

levels. Avoid using the machine for long periods of

time: the noise and vibrations can be dangerous

causing irritation, stress, fatigue and hypacusia

(hearing problems). Prolonged machine use exposes

the user to vibrations that can generate “white finger

phenomenon” (Raynaud’s Phenomenon), carpal

tunnel syndrome and similar disturbances. This can

lead to a lack of sensitivity in the hands making it

difficult to notice changes in temperature as well as

causing numbness. When using the machine

regularly or in continuation, the user must control the

condition of his hands very carefully. If any of the

symptoms described above appear, consult a doctor

immediately.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of McCulloch EL1641 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,18 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

McCulloch EL1641 Manual

Product: