Manual McCulloch CS 410 Elite (page 16 of 172) (English, Turkish)

478451

Zoom out

Zoom in

1/172

ASSEMBLY

16 – English

Fitting the bar and chain

Check that the chain brake is in disengaged position by

moving the front hand guard towards the front handle.

(25)

Remove the knob and remove the clutch cover (chain

brake). Take off the transportation ring. (18)

Fit the bar over the bar bolts. Place the bar in its rearmost

position. Place the chain over the drive sprocket locate it

in the groove on the bar. Begin on the top edge of the bar.

Make sure that the edges of the cutting links are facing

forward on the top edge of the bar. (19)

Fit the clutch cover (chain brake) and locate the chain

adjuster pin in the cut-out in the bar. Check that the drive

links of the chain ﬁt correctly on the drive sprocket and

that the chain is in the groove on the bar.

Tension the chain by turning the wheel down (+). The

chain should be tensioned until it does not sag from the

underside of the bar. (14)

The chain is correctly tensioned when it does not sag from

the underside of the bar, but can still be turned easily by

hand. Hold up the bar tip and tighten the bar knob by

turning the knob clockwise. (15)

When ﬁtting a new chain, the chain tension has to be

checked frequently until the chain is run-in. Check the

chain tension regularly. A correctly tensioned chain

ensures good cutting performance and long life. (11)

Fitting a spike bumper

The spike bumper is factory ﬁtted on CS 450 Elite. To ﬁt a

spike bumper on CS 410 Elite - contact your servicing

dealer (retailer).

WARNING! Switch off the engine before

carrying out any checks or maintenance.

The stop switch automatically returns to

the start position. In order to prevent

unintentional starting, the spark plug cap

must be removed from the spark plug

when assembling, checking and/or

performing maintenance.

Always wear gloves, when working with

the chain, in order to protect your hands

from injury.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of McCulloch CS 410 Elite in the language / languages: English, Turkish as an attachment in your email.

The manual is 5,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

McCulloch CS 410 Elite Manual

Product: