684268
11
Zoom out
Zoom in
Previous page
1/376
Next page
Contents
INTRODUCTION.......................................................... 11
SAFETY........................................................................12
ASSEMBLY.................................................................. 16
OPERATION.................................................................16
MAINTENANCE............................................................19
TRANSPORTATION AND STORAGE......................... 21
TECHNICAL DATA.......................................................21
ACCESSORIES............................................................22
INTRODUCTION
Operator's manual
The initial language of this operator's manual is English.
Operator's manuals in other languages are translations
from English.
Overview
(Fig. 1 )
1. Blade
2. Grease filler cap, bevel gear
3. Bevel gear
4. Cutting attachment guard
5. Shaft
6. Start throttle button
7. Stop switch
8. Throttle trigger
9. Throttle lockout
10. Suspension ring
11. Cylinder cover
12. Starter rope handle
13. Fuel tank
14. Choke control
15. Air filter cover
16. Nut
17. Support flange
18. Support cup
19. Protective guard
20. Handlebar clamp
21. Operator's manual
22. Transport guard
23. Socket Wrench
24. Hex wrench
25. Harness
26. Trimmer head
27. Air purge
28. Washer
29. Retainer pin
30. Hex wrench
31. Zip tie
Symbols on the product
(Fig. 2 )
WARNING! This product is dangerous.
Injury or death can occur to the operator or
bystanders if the product is not used
carefully and correctly. To prevent injury to
the operator or bystanders, read and obey
all safety instructions in the operator's
manual.
(Fig. 3 )
Please read the operator's manual carefully
and make sure that you understand the
instructions before use.
(Fig. 4 )
Use a protective helmet in locations where
objects can fall on you. Use approved
hearing protection. Use approved eye
protection.
(Fig. 5 ) Use approved protective gloves.
(Fig. 6 ) Use heavy-duty slip-resistant boots.
(Fig. 7 )
The product can cause objects to eject,
which can cause injury.
(Fig. 8 ) Maximum speed of the output shaft.
(Fig. 9 )
Keep a minimum of 15 m (50 ft) distance to
persons and animals during operation of the
product.
(Fig. 10 )
Risk of blade thrust if the cutting equipment
touches an object that it does not
immediately cut. The product can cut off
body parts. Keep a minimum of 15 m (50 ft)
distance to persons and animals during
operation of the product.
(Fig. 11 ) Air purge bulb.
(Fig. 12 )
Choke: Set the choke control in the choke
position.
462 - 002 - 07.02.2018 11
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for McCulloch B43 BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of McCulloch B43 BT in the language / languages: All languages as an attachment in your email.

The manual is 4,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info