684269
22
Zoom out
Zoom in
Previous page
1/504
Next page
3. Remove the guide bar and the chain.
4. Clean the oil holes and the groove.
Note: It is necessary to clean the oil holes and the
groove after each 5 hours operation.
5. Remove the burrs of the guide bar rails with a flat
file.
Note: Burrs of the guide bar rails are a usual
process when the guide bar rail wears.
6. Use a flat file to restore smooth edges and sides if
the top of the guide bar rail is rough.
7. Replace the guide bar.
To lubricate the cutting blade (extended
hedge trimmer attachment)
For easier operation and longer life, lubricate the
cutter blades before and after each use.
Apply the oil until it goes between the two blades.
Lubricants must be non-toxic, non-hazardous, and
prevent corrosion for moving metal parts.
TRANSPORTATION AND STORAGE
Keep equipment safe during transportation to
prevent damage and accidents.
Keep the product and equipment in a dry and frost-
proof area.
Clean the product.
Replace or repair damaged components.
Use the correct protective cover on the product that
does not keep moisture.
Keep the product tightly attached during transport.
TECHNICAL DATA
unit B33 PS
(B33BCSMC)
B33 PS+
(B33BCSMC)
Engine Specifications
Cylinder displacement cm
3
33 33
Cylinder bore mm 36 36
Stroke mm 32 32
Idling speed min
-1
2700-3200 2700-3200
Maximum speed of output shaft min
-1
8500 8500
Maximum power speed min
-1
10000 10000
Maximum engine output kW/min
-1
0.9/7000 0.9/7000
Spark plug RCJ6Y RCJ6Y
Electrode gap mm 0.65 0.65
Fuel tank capacity cm
3
700 700
Noise and Vibration Data
Equivalent vibration level (ahv, eq), equipped with trim-
mer attachment, left/right handle - see note 1
m/s
2
5.4/6.7 5.4/6.7
Equivalent vibration level (ahv, eq), equipped with brush-
cutter attachment, left/right handle - see note 1
m/s
2
6.6/8.1
Equivalent vibration level (ahv, eq), equipped with pole
saw attachment, left/right handle - see note 1
dB(A) 5.4/6.3
Equivalent vibration level (ahv, eq), equipped with hedge
trimmer attachment, left/right handle - see note 1
dB(A) 5.4/6.7
22 860 - 001 - 28.10.2018
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for McCulloch B33 PS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of McCulloch B33 PS in the language / languages: All languages as an attachment in your email.

The manual is 5,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info