782193

MCAllister MSSP120 Manual

30
Zoom out
Zoom in
Previous page
1/116
Next page
30
Operation
Observe the safety instructions!
Important note: The machine must only be commissioned when the protection
and safety equipment is completely mounted.
Setting the saw bench, Fig. 4,5
Setting the angle scale
• Release the star button (G) and bring the saw bench (D) to a right angle in
relation to the saw blade.
• Use a 90° angle (E) to measure the right angle between the blade and the
bench. The saw blade should be 90° to the angle.
• Close the star button (G) again when the distance between the blade and the
90° angle is at a minimum. The bench should then be at 90° to the saw blade.
• Release the lock screw (F) and bring the indicator to the zero position. Fas-
GB MSSP120
In more detail...
Intended use
• Risk of injury of ngers and hands due to the saw blade when guiding the
workpiece inappropriately.
• Injuries if the workpiece is thrown away when holding and guiding it in-
appropriately, e.g. working without stop.
• Health risk due to noise. The admissible noise level is exceeded during
working with this machine. Always wear personal protective equipments
such as hearing protection.
• Injuries due to faulty saw blade. Check the saw blade regularly and before
each use for damage.
• Danger due to electricity, use of improper electric connection cables.
• When using special equipment, the operating instructions of this equip-
ment must be read thoroughly and complied with.
• Furthermore, less obvious remaining risks can exist despite all protective
measures.
• Remaining risks can be minimised, if the safety instructions and Intended
use as well as the entire operating instructions are observed.
WARNING!
Switch the machine off and disconnect the pow-
er supply unit before making any adjustments or
carrying out maintenance works, or replacing the
saw blade.
Wear gloves when handling the saw blade.
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MCAllister MSSP120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MCAllister MSSP120 in the language / languages: English, German, French as an attachment in your email.

The manual is 4.52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info