Manual MCAllister MSSP120 (page 24 of 116) (English, German, French)

782193

Zoom out

Zoom in

1/116

Important!

If the machine has a tendency to move or tilt

during operation, it must be restrained in the

workspace by four screws (not provided).

GB MSSP120

Getting started...

Assembly

Mounting the saw on a work bench (Fig. 3)

1. A workbench made from solid wood is betier than one made of plywood, as

interfering vibrations and noise are more noticeable with plywood.

2. The necessary tools and small parts for assembling the saw on a work-

bench are not supplied with the saw. However, use equipment of at least

the following size:

1 - Saw body

2 - Foam rubber base

3 - Work bench

4 - Flat seal 9/321.0 7mm (4x)

5 - Washer 9/321.0 7mm (4x)

6 - Hexagonal nut 1/4-20 (6mm 4x)

7 - Hexagonal nut 1/4-20 (6mm Lock nut 4x)

8 - Hexagonal bolt 1/4-20 (6mm) x length (4x)

3. First of all, drill holes into the seating surface and then insert the screws.

4. A foam rubber base for reduction of noise is not supplied with the saw ei-

ther. However, we expressly recommend that you use such a base to keep

vibration and noise to a minimum. Ideal size 400 x 240 mm

Note! All bolts should be inserted from the

top. Install the lock washers and hex nuts

from the underside of the workbench.

Fig. 3

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of MCAllister MSSP120 in the language / languages: English, German, French as an attachment in your email.

The manual is 4.52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

MCAllister MSSP120 Manual

Product: