782193
17
Zoom out
Zoom in
Previous page
1/116
Next page
GB
Getting started...
MSSP120
17
Safety
General Safety
ensure that the connections are made and used properly.
12 Do not use the mains lead for purposes for which it was not intended.
Do not use the mains lead to pull the plug out of the mains socket.
Protect the mains lead from heat, oil and sharp edges.
13 Securely support the workpiece
An additional support is necessary for long workpieces (table, trestle,
etc.) in order to prevent the machine from tipping over.
Use clamps or a vice to grip the workpiece rmly. This is much safer
than holding it with your hand.
14 Avoid placing your body in an unnatural position.
Make sure that you have secure footing and always maintain your
balance.
Avoid awkward hand positions in which a sudden slip could cause one
or both hands to come into contact with the ginding wheel/belt.
15 Take care of your tools
Keep cutting tools sharp and clean in order to be able to work better
and more safely.
Follow the instructions for lubrication and for tool replacement.
Check the connection cable of the electric tool regularly and have it
replaced by a recognised specialist when damaged.
Check extension cables regularly and replace them when damaged.
Keep the handle dry, clean and free of oil and grease.
16 Pull the mains plug out of the mains socket.
Never remove loose splinters, chips or jammed wood pieces from the
running saw blade.
During non-use of the electric tool or prior to maintenance and when
replacing tools such as saw blades, bits, milling heads.
17 Make sure that no spanners, keys etc. are left attached.
Check before switching on that all spanners, keys and setting tools
have been removed.
18 Avoid unintentionally starting up the device.
Check that the switch is set to OFF on the device when the mains plug
is inserted into the mains socket.
19 Using an extension lead for working outdoors.
Only use approved and appropriately identied extension cables for
use outdoors.
Only use cable reels in the unrolled state.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MCAllister MSSP120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MCAllister MSSP120 in the language / languages: English, German, French as an attachment in your email.

The manual is 4.52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info