634676
30
Zoom out
Zoom in
Previous page
1/89
Next page
30
5. Connection and control elements
(1) Input selection switch
You can use the input selection switches to select between the individual inputs (signal sources) for the channels.
Example:
If the switch for channel A PH1/LN1–LN2 is in position LN2, the signal from the device connected to the LN2
connection is routed to channel A. Input PH1/LN1 is not reproduced in this switch position.
To play back from this input, the input selection switch from channel A has to be switched to position PH1/LN1.
Minimise the volume using the corresponding channel fader before changing over an input
selection switch. Possible differences in volume between the input sources may otherwise
cause sudden excessive volume.
(2) Level display for the output signal
The level display indicates the level of the output signal. If possible, the indicator should not exceed “0 dB” as the
music signal may otherwise be distorted.
(3) GAIN control
You can use these control knobs to adjust the mixer inputs to the output level of the respective signal source (record
player, CD player etc.).
Position “0” = mixer input is very insensitive
Position “10” = mixer input is very sensitive
(4) MIC control
This rotary control is used to set the microphone volume.
Position “0” = low microphone volume
Position “10” = high microphone volume
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mc crypt DJ-60-PC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mc crypt DJ-60-PC in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info