634685

Mc crypt DJ-45 Manual

20
Zoom out
Zoom in
Previous page
1/49
Next page
20
7. Connection and Operating Elements
12. Power cable
13. REC (record RCA output)
Connect a recording unit (not included) to the REC socket with a standard RCA cable (not included).
14. AMP (master amplier RCA output)
Connect an amplier (not included) to the AMP socket with a standard RCA cable (not included).
15. LINE / PHONO (two phono and two line RCA inputs)
Connect the audio input to the line / phono with standard RCA cables (not included).
16. Grounding screw GND
Connect the earth terminal to all connected analogue audio devices.
Make sure when mounting on a desk with other equipment that there is sufcient ventilation. Do not place the device on
a soft surface such as, for example, a carpet or a bed etc.
In addition, air circulation must not be obstructed by objects such as magazines, tablecloths or curtains. This can
prevent dissipation of heat from the device and can lead to overheating (re hazard). To ensure adequate ventilation,
there must be 5 cm of free space around the plug-in power unit.
Do not drill any holes or screws into the product in order to attach the device somewhere as this may damage it and
impair its safety.
When setting up the device, make sure that it has a secure footing and is on a stable surface as people could be injured
if the mixer fell down.
When setting up the device, make sure that the connection cable is not being pinched or damaged by any sharp edges.
Always lay the cables so that no-one can trip over them or become entangled in them. Risk of injury!
When selecting a location to set up the mixer, make sure it will not be exposed to direct, intensive sunlight, vibration,
dust, heat, cold or humidity. No other appliances with strong electric or magnetic elds, for example transformers,
engines, cordless telephones, radios or PCs may be located in the direct vicinity of the mixer as these could affect it.
In view of the variety of varnishes and polishes used for furniture, the base of the device might leave visible marks on the furniture
it is placed on as a result of a chemical reaction. Therefore the device should not be placed on valuable furniture without sufcient
protection.
The mixer is suitable for installation in a desk and as a table device. There are 4 mounting holes in the upper covering board for fastening when
mounting on a desk.
1. Connect the necessary inputs, outputs, ground, microphone and headphones.
2. Switch the power switch (1) to the off position (O). Insert the power plug on the power cable into a mains outlet of 220 – 240 V/AC, 50 Hz.
3. Turn the volume control of the master volume fader and PFL volume control all the way down.
4. Switch the power switch (1) to the on position (I).
5. Select the desired music and play it from the connected input devices
6. Now you can try out the individual functions of the mixer.
8. Installing the device
9. Operation
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mc crypt DJ-45 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mc crypt DJ-45 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info